Jump to content
SAU Community

Recommended Posts

Modifing cars is a headf**k for starters ))

yes this is true. however when they sell DW knuckles as a bolt in solution and it is far from it you tend to get a little pissed off.

i had to modify the following

-camber arms

-traction rods

-machine up a 50mm spacer to sit on top of the coilover cause without it my car was slammed to the ground so hard haha

Awesome :yes: now i just gotta sort it and learn to drive :P Your car would weigh much less making it crazy fun..... Be interesting to hear your thoughts on the new setup and how it compares to the old!

yeah mine was pretty spastic with the neo combo at its peak!

here's a video i did at a grip day at mallala did a best of 1:18 flat which is pretty quick but considering i did it with a drift set up on 2nd hand street tyres is pretty funny haha.

haha yeah scrubbing big time.. the bit where it fills the cabin with smoke when doing that high speed 4th/5th gear kink is the suspension compression so much from the wing downforce and pushing the tyre into the cut metal guard under the overfender... left a nice groove in it thats for sure.

i have since then cut it higher up

small update... took it to All Type Crash who removed the banged up rear and fixed it all up for me.. sweet!

First time actually driving it with the 30DET today and i gotta say.... torque.. where have you been all my life! its not even tuned for the bigger motor but runs so well atm, gave it some boost (not much tho) and it just pulled effortlessly haha hopefully goes well!

tune tomorrow!

268303_396004717115304_1717390816_n.jpg

375750_396000130449096_1714014592_n.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...