Jump to content
SAU Community

Recommended Posts

Hi guys,

Just doing some cleaning in the bay and i had a poke around where the belts are at the front of the engine. To my horror i find

some of the belts are cracked and torn on the side!!!!...the car has done 65,000Km, surely nothing happens to belts this early??

The belts are original, the say NISSAN all over it. Any opinions to why? and its solutions?............oh and i havent been hearing any weird noises or anything when starting up cold/warm or driving slow/hard.

Some pics to explain my point:

post-51287-1255315882_thumb.jpg<< Torn belt + Cracking

post-51287-1255315916_thumb.jpg<< another showing tear.

Cheers!

post-51287-1255315902_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/291615-this-cant-be-normal-can-it/
Share on other sites

I'd expect the belts may begin to crack but the fraying suggests something is wrong, possibly needs an adjustment somewhere as it is causing undue pressure on one side of the belt, or else something is pretruding and cutting it as it runs past.

I'd expect belts to show wear anywhere over 60,000km and due to their age (2003) cracking is always a possibility too.

During my last routine service at approx 56k my mechanic replaced all my belts due to cracking which at that time I was quite surprised but reading this thread makes me feel much better :D

Could you give an approximate figure of how much it cost your for the belts?....lol never in mylife have i had a car long enough to change the belts. First time for me.

mines the 2002 model and also cracked inside....at one stage when it was very cold in Melb, it used to squeek on start-up, but as it heated up, the noise would go away (less than 10 secs)...

i guess i better change mine soon.....i think it's definitely the age of the belts in most cases that would lead to cracks....besides, our VQ engines are very hot...so that would add to the equation somehow....

my v35 has only done 49,000kms....

Mine were in need of replacing at 35,000kms. Given the age of the vehicle and the fact that in japan the belts do way more kms than the speedo indicates, the belt condition is understandable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - there is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...