Jump to content
SAU Community

Recommended Posts

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

you'll need the z32 after you hit 300kw tho... or go for the more expensive nismo afm

speaking of z32s, wheres the cheapest place to get em from, with the plug?

-D

Granted the extra 15mm of the Z32 over the standard size Nismo body may make a difference but not as great as what you would expect cause they have similar resolution and the Nismo bolts straight on with no extra wiring......I'd be ditching the standard restrictive GTR piping if you have a few spare $$$ and go for some hard piping.

Also, PowerFC has a default select feature for the Z32 to get you started whereas manual imput is required for the Nismos.....not an issue unless you're tuning it yourself.

Suppose it boils down to price & personal preferance at the end of the day.

Granted the extra 15mm of the Z32 over the standard size Nismo body may make a difference but not as great as what you would expect cause they have similar resolution and the Nismo bolts straight on with no extra wiring......I'd be ditching the standard restrictive GTR piping if you have a few spare $$$ and go for some hard piping.

Also, PowerFC has a default select feature for the Z32 to get you started whereas manual imput is required for the Nismos.....not an issue unless you're tuning it yourself.

Suppose it boils down to price & personal preferance at the end of the day.

All good points Pete. I myself went the Nismo route, firstly I got them cheap, second, they are direct bolt up, no mods required and I don't like molesting looms and third, if you're really sneaky you can go through regency with them on. Z32's; no chance

Anyone got any ideas how to remove a Vspec decal from the boot lid without fking the paint?

Prepsol, or a thin nylon blade like we do at work (cut down ice cream containers work too)

Prepsol won't hurt 2-pac but will acrylic.......just don't use thinners, LOL :)

prepsol or wax and grease remover shouldn't have any affect on acrylic, but yeah thinners is a big no no.

All good points Pete. I myself went the Nismo route, firstly I got them cheap, second, they are direct bolt up, no mods required and I don't like molesting looms and third, if you're really sneaky you can go through regency with them on. Z32's; no chance

dammit u guys got me thinking

i was gonna go nismo till shane got me thinking about the diameter

and yeah I wanna keep it as regency friendly as possible.

i dont have a powerfc and wont be using that, instead ill be getting a nistune daughterboard for my ecu

just wish the nismo afms werent so damn expensive

-D

dammit u guys got me thinking

i was gonna go nismo till shane got me thinking about the diameter

and yeah I wanna keep it as regency friendly as possible.

i dont have a powerfc and wont be using that, instead ill be getting a nistune daughterboard for my ecu

just wish the nismo afms werent so damn expensive

-D

Be vigilant... I got my AFM's for under $600

Be vigilant... I got my AFM's for under $600

yeah ive seen a few places with them for that much, but ive also seen a pair of z32's for the $300 mark ;\

nismo is probably worth the extra $300 tho

-D

5.5 hours til i have a beer in my hand...

... and 29.5 hours til my next day off begins (if all goes to plan).

jake, you should be at that skanks place giving it to her, no excuses.

Edited by scandyflick
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...