Jump to content
SAU Community

Recommended Posts

Dion, if u read this. Was just looking at the engine u brought, you do know u have to pay aus customs, quarantine, agent fee's, docking fee's, storage fee's on that engine when it arrives here? roughly another 800-1k on top of the buy it price which streeter has quoted u.
ouch.... i hope he did realise this, he seemed to think it was a fair cheap engine :)

Yeah, I did know this, and Im still in front of buying locally because I'm not just getting an engine..

  • Replies 14.2k
  • Created
  • Last Reply

Top Posters In This Topic

Hmmm. Well in the process of my alarm installation we've found my car used to have a boost controller, turbo timer and some sort of temp gauge. Also my standard boost restrictor has been removed.

Now with that removed and a catback exhaust my installer seems to think I'd be running atleast 14psi and he says I'm risking detonation because my timing or something might not be right and that I should hook up a boost gauge to know exactly how much psi I'm running and he can make it so I don't run the risk of detonation.

Is he talking shit or should I be concerned?

Well I took the R out for a drive after work. No detonation what so ever and on the STD boost gauge it makes it all the way up to the second to last line. So I don't think that is 14psi. I think I still might chuck it on the dyno just to check my AFR settings.

I want a boost gauge.. But where the standard GTR cluster is. Anyone know of any? Or where others have mounted their boost gauges?

nismo 1 looks the goods but it reads boost in kg/cm2

http://www.nengun.com/nismo/console-meter-skyline-r32-gtr

Edited by J-Dawg
I want a boost gauge.. But where the standard GTR cluster is. Anyone know of any? Or where others have mounted their boost gauges?

nismo 1 looks the goods but it reads boost in kg/cm2

http://www.nengun.com/nismo/console-meter-skyline-r32-gtr

I had the original aftermarket boost gauge bolted to the left hand side of the dash cluster which was not very regency friendly, and dog ugly.

Mounted this one and an oil pressure gauge where the clock used to be.

DSC00251.JPG

-D

I want to try to keep it as STD or original as possible. Might try and get one of those Nismo clusters.. Don't really see much else out there

Edit: Yeh Dave.. Exactly what I'm looking for! How much that set you back? PM if need be.

Edited by J-Dawg
Yeah I hate that too Dan. No point having two boost gauges! Just replace the standard with one that runs at PSI or BAR and is more accurate

Easier said than done, all 3 gauges in the centre are electronic based gauges which use the same circuitboard. It could be possible to replace the fascia with a psi or bar version however I've never seen one available for purchase. Most of the time people replace that 3 gauge cluster with either defi electric gauge 3 pack or 3x 52mm individual mechanical gauges

-D

Ive got this sort of thing:

http://cgi.ebay.com.au/RADIO-SLOT-POD-3-x-...=item19b78f0f2d

using oil pressure guage, my aem wideband ratio guage, boost guage

not installed yet, then will sell my apexi boost guage

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...