Jump to content
SAU Community

Recommended Posts

Hi Guys

Was anyone there when it finished at Race_solutions I was in the 2ltr class forced but had to leave early i thought the would of posted the results in that thread

Hey guys, new to the forum. Just bought a white '96 R33 GTS-T :)

I saw "TURBOS" - Red R34 GTR on George St the other night.. Man that thing sounds like an absolute monster!!

I often see "321 GO" - White R32 GT? around the West Pennant Hills area - (I think its 321 GO?)

First I saw ATT 74L black r32? Turned onto Narellen Rd

Then I spotted AQN *** parked at a house in Glen Alpine and straight after I saw that I spotted a white skyline AOY *** turn into my street so I sped up to follow and it lives like 30 seconds away from me

I'm not a skyline stalker though

Spotted a sexy dark grey s2 R33 (looks stock) at Coonara Shops a few minutes ago.

Also spotted two deviants out the front, both holding what looked like floppy cow tongues on paddle pop sticks, with one of them urging the s2 R33 driver to do something special.

She did! w000t! hehe :P

Tommyk I came over and stood next to your car for a few minutes to say hi (your car was in the staging lanes) but you weren't around and I had no idea what you looked like :P

saw the sticker on your back window anyway and figured it was you.

spotted a 4 door 33 on bellamy rd, pennant hills.. as well as MIS 33R.. nice looking chick in that one!! :wavey:

I didn't think you liked chicks Mona !!

spotted B mans.

GTST4 @ chastwood

great guy..

pity about the rear though....

Ha ha - what's wrong with my rear ? ? I've been working out :O:) - The car on the other hand is looking worse for wear on the back rear quarter.

Good to meet you Danny. Your GTR sounds awsome.

I got a parking ticket that day as my GF and I wend shopping in Chatswood Chase afterwards - Didn't realise that it was ticket parking - DOH. Oh well.

FINALLY SPOTTED :);)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...