Jump to content
SAU Community

Recommended Posts

spotted Eathan again (rancix) near the gorge - snob !!kidding mate - i was in a mates car going to driving range thats why you didnt see me :O

ohhh sorry, if ya wave big enough from the car i mite wave back just to be nice even though i have no idea who it is :P

spoted wink today at castlehill around 6:30.. was stoped at the main lights on oldnorthen road b4 ya go past the piazza (sp?), waved, but he wasnt looking.... well i think it was wink, hahaha

ohhh sorry, if ya wave big enough from the car i mite wave back just to be nice even though i have no idea who it is :)

spoted wink today at castlehill around 6:30.. was stoped at the main lights on oldnorthen road b4 ya go past the piazza (sp?), waved, but he wasnt looking.... well i think it was wink, hahaha

I was in Chatswood at that time so no not me. :no:

Talked to mass on the way to Chats though. :(

Spotted so many nice cars on the way to work today...

As soon as I got on the M5 there was a maroon R33 with two wings so I got behind them and followed all the way to Liverpool exit.

Then on the hume highway a dark R32 came up beside me and the number plate was A??33R. On elizabeth drive saw a bright yellow R34.

Also spotted two 300zx on hume highway and wallgrove road.

Tues night.. at about 10.20pm? saw a goldish.. 33 on the m5 heading towards mascot.. plates anu - something..

Last night

spotted a gunmetal grey 32 gtr last night on the m5 heading towards camberra way.. plates where like ate - something? some old man driving it.. hehe.. that was at like 6.55pm?

and saw a white 33 with a black or cf bonnet with some airbrushing on the side of the car on railway pde glenfield at 7pm.. didnt catch the plates..

I was in Chatswood at that time so no not me. :D

Talked to mass on the way to Chats though. :D

My friend on another forum thought you were me... and tried to tell me I was in chats wood...i kept telling her it wasnt me.... must have been you

No one spotted my R32 yesterday?

Even went through the city

You all suck :D

I DID!!! I SAW IT!! Was just about to post up...

It was on a towwy... I was in the landsdown upstairs pub eating food at around 4:30.

I looked at the car and said... hmm that GTR looks familiar

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...