Jump to content
SAU Community

Recommended Posts

Spotted a nice blue R32 GTS-t with bronze wheels (standard) and a silver R34 sedan this arvo in Church Street, Parra, pretty much right outside Sherriff's Mini Cars. This was around 5.45pm...

At the lights near Red Rooster?

I saw you again last night near Crystal Carwash - i was going to Bob Janes just opposite

At the lights near Red Rooster?

I saw you again last night near Crystal Carwash - i was going to Bob Janes just opposite

Steve-O, did you spot me in the Stagea, or one of the Skylines?

my postie????on a CT110? :(

its gun metal grey :)

very standard :)

I got kicked off my postie, I can wheel satnd it for over 100 meters and one handed, they said you cant ride the postie anymore something about dangerous riding, huh whatever....lol

If you get the chance stop your postie and say that you know Ben...hahah

If ya see me wave, or throw something heavy or just swear, gunmetal grey 32gtr with 18inch white rims, always goin through old road and going to hornsby.

Ben,

hahah we have a postie at work (asquith golf club) I can just get the front wheel off the ground, but I can do helli's in the soil/gravel road in it hahahah

I think I saw you a few weeks back - fri or sat night. on somerville road round midnight.

Ill keep an eye out!

Chris

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...