Jump to content
SAU Community

Recommended Posts

Spotted a nice Blue v35 on the way to work this morning.. gave em a wave but dont know if they saw me

where u work slim? I know there's a blue V35 at North Parra...

spotted a red/pink (not sure of colour - it was a darkish pink) r33 at parklea yesterday with chromes on the front and stockies on the rear

where u work slim? I know there's a blue V35 at North Parra...

spotted a red/pink (not sure of colour - it was a darkish pink) r33 at parklea yesterday with chromes on the front and stockies on the rear

Work in North Sydney..

Was around Lane Cove where I saw him though..

Spotted LJ This morning..

Was in a daze staring out the window.. and noticed some one staring at me.. took me a few seconds to realise who it was haha :(

oh ans a white R34 some where.. and a sparkly red R33 on pennant hills road.

Spotted LJ This morning..

Was in a daze staring out the window.. and noticed some one staring at me.. took me a few seconds to realise who it was haha :(

oh ans a white R34 some where.. and a sparkly red R33 on pennant hills road.

haha i didn't even realise it was your car until i was passing by right beside you.. then started waving frantically when i saw it was you lol

new kit looks very very very niiiiiice :(

haha i didn't even realise it was your car until i was passing by right beside you.. then started waving frantically when i saw it was you lol

new kit looks very very very niiiiiice :P

hahahha :)

thanks :(

Slim was u driving down carlingford rd this morning around 8:40'ish? cause if u was i spotted u.

normally I would be driving that way.. but I went a different way today cos I was hunting for a BP with ulitimate..

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...