Jump to content
SAU Community

Recommended Posts

My Girlfriend sent me an sms yesterday asking me if i know someone in a gold R34 with the numberplate "NUR" driving through wahroonga....

Thats dave in his nur spec....I spotted him tonight near belrose on forest way.

bayside blue w/silver 18x10.5 +15 LM GT4's = my kind of R34 GT-R

r34fs5.jpg

and there's another one next to it? :P

hot!!

yesterday, spotted a white 33 gtst with gold GTC's at kellyville shops...looked the goods..and also spotted a maroon 32 GTR plates were BAZ-***

Edited by Black Widow

anyway- time for some R35 love;

spotted this one at Homebush Bay at around midday today, he turned left on to Hill Rd here

r35hbho2.jpg

he ended up behind me, and i drove at 55 so he'd get annoyed and rip past me while i had my window down... which he did :cool:

gave it full-throttle off the lights here (but not launched) and it sounded great. needs a much bigger 'zorst though- you can really hear the air struggling to rush through the standard system. twin 3" stainless with de-cat would be insane

r35lightsge2.jpg

r35parrauq2.jpg

r35turnez3.jpg

bye bye :'( ....

r35garagecg8.jpg

they obviously test drive it for potential customers around the Olympic Park area. i've seen that one 3 times myself (although once was before it was registered, getting petrol at the Shell servo in Lidcombe)

seen the haltech one twice on the street, mark and russ's on the back of a trailer, and a NSW registered black one at Mount Colah. damn these common as muck R35s!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...