Jump to content
SAU Community

Recommended Posts

hey Nick, when you say GT-R coming soon...its not the Lancer GT-R right? wehehe Jk.

so what if it is?

The Lancer GT-R is the corner stone of the JDM scene, and should be recognised.

lol..

it almost look like the done up cars in the Philippines. =)

i swear i saw a couple of them last time i visited. They love the multiple mirrors there. specially the beloved Jeepneys below! :P

JeepneyFront.jpg

so..i spotted this Mitsubishi Lancer GT-R with dual mirrors on each side, dual exhaust left and right, custom kits (mini bullbar at the rear) and custom vinyls. spotted at Blacktown Westfields. :P Oh and that black stripe to break the line is duct-tape.

21022010085.jpg

21022010086.jpg

Poor Lancer!

spotted KNG GTR on windsor road this morning (black r33 gtr). I putted pasted you in a yellow dc2 itr. you on here?

I saw that car in thornliegh a while ago, sounded very tuff! and not to mention it looks very nice too

so..i spotted this Mitsubishi Lancer GT-R with dual mirrors on each side, dual exhaust left and right, custom kits (mini bullbar at the rear) and custom vinyls. spotted at Blacktown Westfields. :cheers: Oh and that black stripe to break the line is duct-tape.

21022010085.jpg

21022010086.jpg

Now we know where to link the new kids looking for a cheap gtr to.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...