Jump to content
SAU Community

Recommended Posts

hey guys, i got an email at work advising of these new speed camera's at a bunch of melbourne's major intersections on the east side. they are shaped like a tall grey cylinder and have 3 black strips with cameras that watch each lane. i dunno if this was proved as a hoax or not. and ages before that i saw photo's of wheelie bin cameras? was that a hoax as well?

Link to comment
https://www.sau.com.au/forums/topic/292014-new-speed-cameras/
Share on other sites

Got that email ages ago, but have never seen one before, even at the intersections that was suggested in the email.

But they are pretty much just a replacement of the red light / speed cameras around Melb.

ok guys it looks like the emails were true and these cameras DO EXIST! while on the cruise last night, we were heading up maroondah hwy from lilydale and a couple of minutes up the road past dorset road on my right hand side was one of those bloody cameras. i dunno if it was turned on but i dont think a potato sack will cover it as it appears to be about 9ft tall. so id check out that email again and find out where the rest of these buggers are

There's a new camera installed at corner of Highbury Rd & Huntingdale Rd.

It's the standard new style camera + the thing in the gutter as per the pic.

Must have been installed in the last few days, didn't notice during last week going to work

post-38314-1255860263_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...