Jump to content
SAU Community

Recommended Posts

hey guys, i got an email at work advising of these new speed camera's at a bunch of melbourne's major intersections on the east side. they are shaped like a tall grey cylinder and have 3 black strips with cameras that watch each lane. i dunno if this was proved as a hoax or not. and ages before that i saw photo's of wheelie bin cameras? was that a hoax as well?

Link to comment
https://www.sau.com.au/forums/topic/292014-new-speed-cameras/
Share on other sites

Got that email ages ago, but have never seen one before, even at the intersections that was suggested in the email.

But they are pretty much just a replacement of the red light / speed cameras around Melb.

ok guys it looks like the emails were true and these cameras DO EXIST! while on the cruise last night, we were heading up maroondah hwy from lilydale and a couple of minutes up the road past dorset road on my right hand side was one of those bloody cameras. i dunno if it was turned on but i dont think a potato sack will cover it as it appears to be about 9ft tall. so id check out that email again and find out where the rest of these buggers are

There's a new camera installed at corner of Highbury Rd & Huntingdale Rd.

It's the standard new style camera + the thing in the gutter as per the pic.

Must have been installed in the last few days, didn't notice during last week going to work

post-38314-1255860263_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...