Jump to content
SAU Community

Second Hand Tyres - Never Pay For New Tyres Again.


Recommended Posts

Though i would add a little information about this, took me a while of searching to dig up these places.

Just got 255/40/17 90% potenzas re050a runflats for $400 balanced and fitted... same type as my mums new mazda 6

Would cost more than $1000 new and theyre about 10 times better than my old federal 595ss

im never going to pay for new again, scoped out 4 places... here they are... easy searching.

North End tyres

29 a Carrick Drv, Tullamarine, VIC 3043

p: (03) 9330 3145

Secginhand Tyre & Brake Service

2/14A Adrian Rd Campbellfield VIC 3061 - (03) 9357 9970

9357 9970

ENTYRE ENTERPRISES

Cnr Abbotts Rd and England St.

Dandenong South 3164

9706 5443

Northwest tyres

62 Newlands Rd Reservoir VIC 3073 - (03) 9462 2692

Enjoy :D

Edited by V-Spec

I've had my own tyres "go off" before, few burnouts and they simply don't grip like they used too when i used to drag race a fair bit.

hence i stopped burnouts on street tyres, no gain what so ever.

They still had a good 85-80% tread on them too, but became rather dangerous in the wet, i know North End sell that kinda stuff as i've grabbed stuff from there before.

Just because a tyre has tread doesn't mean they are magically better so be very careful

Highly recommend these guys:

Northwest tyres

62 Newlands Rd Reservoir VIC 3073 - (03) 9462 2692

I've been there heaps of times when I was younger and didn't have much money. Good guys and you'll get a good deal on tyres that still have 80%+ tread. Normally around 40-50% of the cost of new ones. Not sure whether I would go there now with the Skyline, i'd rather pay a bit more and be 100%sure of what i'm getting, but if you've got a daily or something, i'd recommend it.

I've had my own tyres "go off" before, few burnouts and they simply don't grip like they used too when i used to drag race a fair bit.

hence i stopped burnouts on street tyres, no gain what so ever.

They still had a good 85-80% tread on them too, but became rather dangerous in the wet, i know North End sell that kinda stuff as i've grabbed stuff from there before.

Just because a tyre has tread doesn't mean they are magically better so be very careful

Agreed. Just put on Michelin PS2 with 90%thread and don't grip anything like original Michelin PS2

Fawkner Wheels and Tyres sell second hand tyres for $70 each incl fitting and balancing. i got 2 215/45/17 goodyears with 60% and 2 225/45/17 Micillans pilotsport.....but there service is the WORST EVER...thats why i now go to Tyre Experts....much better

might be a silly question but where would you guys recommend going for stretch tyres, as i want to put 235/40 on my 18x10 wheels ( i dont think they are a major stretch?)

as i know some places cant/wont do them.

might be a silly question but where would you guys recommend going for stretch tyres, as i want to put 235/40 on my 18x10 wheels ( i dont think they are a major stretch?)

as i know some places cant/wont do them.

Try motor sport wheels and tyres on sth gippy hwy in dandy, bought my wheels and the last 2 sets of tyres from there.

all for saving money, but just be careful we don't go giving guys with sub 200+rwkw an option and an idea that's viable and safe to buy $50 255 tyres and think they are perfect. sure there are some accident write off on's etc and some are probably okay, but some are probably rubbish too. just be careful please.

might be a silly question but where would you guys recommend going for stretch tyres, as i want to put 235/40 on my 18x10 wheels ( i dont think they are a major stretch?)

as i know some places cant/wont do them.

tyrepower hawthorne, ask for mickey and tell him hamish sent ya :down:

235/40/18 on a 10... i can see why a lot of places wouldn't do it.

lol... 235 on a 10 is not that much of a stretch these days, not really legal though :P

why dude?

er... i'm guessing to fit under his guards / drift / have stiffer sidewalls / look cool

I had 235's on R34GTR wheels - and they looked stretched...

put them on a 10" is ohdears...

anyway - as paul said, please be careful, the tyres are cheap FOR A REASON. Just like ebay turbos

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...