Jump to content
SAU Community

Recommended Posts

Hey guys, my car makes a metallic clunking noise when taking off or braking however it seems to only do this on hot days! It started making the noise last summer but went away as the weather cooled down. I've had no problems all through winter but it just started making the noise again.

Does anyone know what might be causing it? The noise is coming from the front of the car. Ive got relatively new springs and shocks on my car so I dont think they're the cause. Could it be some old rubber bushes or mounts that are on their way out??

Any help would be much appreciated!

Link to comment
https://www.sau.com.au/forums/topic/292389-metallic-clunking-noise-on-hot-days/
Share on other sites

Yeah I've got the same problem, same car. Started happening last summer as well and only noticed it again last weekend when the weather got freakishly hot in Perth! I've spoken to a mate of mine who's a mechanic, he reckons that some of the bushes might just need a bit of lubrication or replacing. What ever my cause is, it's definitely not the wheel nuts.

Edited by MacGuyver

does it only do it when the car has been driven or will it do it from the moment you start the car and take off for the first time?

the rubber mounts does sound likely as in summer they would be softer and allow more movement. as to which mounts if could be, now that is the problem. could be anything from exhaust mounts, to suspension, gearbox, engine, etc. i'd start by jacking the car up and going over the easy ones to get to with a spanner/socket set.

Iv got a similar if not the same problem. iv got a 96 S2 R33. the front right of the car makes a clunking or a creeking noise. it happens as soon as i take of slowly, as the front of the car rises it makes the noise, also as im braking and coming to a stop i can hear it. Also lol, as i turn the steering wheel, when driving slowly it makes a click sometimes, not all the time though its weird

Any ideas??

most common noise u describe is driveshaft splines noisy, wheels without centre spacers or aftermarket spacers not centred and tightened evenly,

or diff, copper grease in splines

I have stock wheels so I dont think its spacers in my case. The noise on mine seems to come from the front passenger side

Hi Guys

Got the same problem as described by the other guys, i thought it was the suspension, but i have recently got coil overs and same thing is happening.

i still have a fair bit of pad left on the fronts, it gets pretty bad, not sure if it is doing any damage or not.

anyone with any fixes yet?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...