Jump to content
SAU Community

Anyone In Se Melb (near Cranbourne) Have An Ecu I Can Try In My Car?

wlspn

By wlspn,
in Victoria

 Share

Recommended Posts

wlspn Proficient

wlspn

Posted
Posted

Hi. Having major problems with car & after eliminating so many other things starting to suspect ECU. Does anyone in SE Melb (Im in Cranbourne) have an ECU they are not currently using (car off road, etc) I could try? Car is a R32 GTST but fitted with a series 1.5 (95 model) RB25 so s1.5 or s2 will do the trick.

Thanks

paulr33 Grand Master

paulr33

Posted
Posted

im not local but ive got a series II stock ECU you can try - can bring to next car club meeting

its unlikely the stock ECU is fault, it has lots of built in / post diagnostics and failsafe modes to protect itself

try unplugging the main battery terminal to the car, pump the brake pedal a few times and then reconnect batt and start car

this will clear all the daig codes on the ECU and instruct it to self learn or at least re-run diag at post engine start

it may clear some non-fatal crap but worth a shot, given zero effort required

itshimdazza Rising Star

itshimdazza

Posted
Posted

wlspn,

where about in Cranny are you? I dont have a spare ecu but i am there as well and its good to hear of fellow liners out & about. post a pic of your line and i will look out for ya.

Ps. mine in my avatar..

Dazza

wlspn Proficient

wlspn

Posted
  • Author
Posted
Hey man just wondering how your cars going, no rush on the ECU or anything just curious if it fixed your problemo

Na mate, had no luck... Thanks very much for your help but. Think problem is somewhere in AFM circuit... Have replaced AFM & checked resistance & voltage of all wires & came up good, but when car is running & you wiggle wires it really changes idle so has to be a problem in there somewhere... Was going to return ECU yesterday but went to leave work & found the lancer had a flat tyre... After fixing that was absolutely rooted! Will give you a call & come down either over weekend or early next week if thats ok? Thanks again buddy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • MBS206
      NC MX5

      By MBS206 · Posted

      My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • dbm7
      Automatic Power Button Light Flashing

      By dbm7 · Posted

      Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Duncan
      R34 Plug Identification

      By Duncan · Posted

      Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...