Jump to content
SAU Community

Recommended Posts

Ok. My A31 cefiro has a full cage which i know is illegal and cannot be engineered.

However, ive heard that half cages can be engineered.

I have also heard in 2 door coupes to engineer a half cage, the back seats need to be removed along with the rear seat belts.

If this is true. How does this work with a 4 door like my A31?

Can someone shed some light on this situation for me please?

Link to comment
https://www.sau.com.au/forums/topic/295021-legislation-on-roll-cages/
Share on other sites

You can't have a cage in a location where an occupant can possibly strike their head.

Your options are to get a removable cage, and only fit it for off-street events, or delete the seating positions where the cage is permanently installed.

You can easily get half cages Engineered/Rego'd in your state. You just work in the guidelines set out.

Simply talk to the relevant transport authority, or better yet, talk to a cage fabricator. They generally are the best people to talk too.

If the cage business says they do not know, go to one that does. A decent workshop that takes interest will know and be upto date with the laws.

I do believe you can get a half cage legal and retain rear seats.

I think you are NSW, so the Vic info i have won't help you.

The same basic rules apply for all states though - the cage mustn't be within a certain distance of the occupants (I can't remember the exact distance any more) and must be padded. I'm yet to see a decent cage design that allows anyone to keep the rear seats, so work on the theory that your car will become a two seater.

Yeah im pretty certain in QLD for registration cages have to be bolted in only and not welded. I'm looking into this for next year aswell as i want a registrable half cage that is cams approved.

Edited by PM-R33
what is the story on bolt in full cages? as in with the front hoops that go around dash?

Full cages are a no-no, unless your car is on race/rally rego and you enjoy wearing a helmet everywhere lol

Full cages are a no-no, unless your car is on race/rally rego and you enjoy wearing a helmet everywhere lol

emagine the looks from other drivers. :( so full bolt in can be legal if its plated / run as a half cage?

  • 7 months later...
  • 2 weeks later...
Full cages are a no-no, unless your car is on race/rally rego and you enjoy wearing a helmet everywhere lol

wrong. depends on the state.

it is legal in victoria as long as you follow of the restrictions of how close the cage comes into the passenger zones.

edit, such cages would have to go through the dash, cages going around the dash(not only do they suck) but they wouldn't pass.

Edited by Peter89
  • 1 month later...

I recently got a new car and it has a full 6 point cage.

It is engineered and registered. I can get the details of the engineers report if anyone is interested.

I have also seen at my old work a 9 point cage in a GT3 porsche that was also engineered with removable side intrusion bars with very similar wording in it.

wrong. depends on the state.

it is legal in victoria as long as you follow of the restrictions of how close the cage comes into the passenger zones.

edit, such cages would have to go through the dash, cages going around the dash(not only do they suck) but they wouldn't pass.

not true if my memory is correct when i spoke to brown davis he said only half cages are legal, and that he wrote the RWC conditions on roll cages so seems to know his stuff

having said this my memory may be wrong.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...