Jump to content
SAU Community

Recommended Posts

ok cut a long story short.

rb25det 350rwhp 20psi kkr480 turbo done 50,000kms or so since new.

ive been running no bov for pretty much the whole 50,000kms.

ive notice last few months if i bring it on boost 20psi and as soon as i back off it will dump some oil out the rear, wont do it driving normally or idling.. just after a big compressor surge ...

if fitted up a greddy bov just before throttle body. anyway basically its stoped the oil dump after a big decel from what i could see atleast.

could the compressor surge be causing the oil 2 get past the seals and out the exhaust?

i hate bov's i really really do..id rather not run one.. car seems 2 come on alot harder/better without any bov..

i just get fu k ed off with the oil smoke after a i get into it. embarrasing haha.

any ideas? or could it be my motor?

Edited by l0WRB
Link to comment
https://www.sau.com.au/forums/topic/295099-turbo-or-motor/
Share on other sites

If you have in and out shaft play then it is the turbo. Or check oil drain pipe make sure its not kinked and engine is not over filled.

engine is not over full, only done oil change 200kms ago.

oil return line isnt kinked either.

took 4 a spin just before tightened the bov right up.

20psi right under it and backoff it dropped a puff of oil smoke hrmm

Link to comment
https://www.sau.com.au/forums/topic/295099-turbo-or-motor/#findComment-4922217
Share on other sites

Could it be the PCV or crank case breather? Are you running a catch can?

There is a lot of manifold vacuum at close of throttle, it could be related to that.

PCV isnt hooked up

breathers are running back into the intake pipe.

Link to comment
https://www.sau.com.au/forums/topic/295099-turbo-or-motor/#findComment-4922265
Share on other sites

PCV isnt hooked up

breathers are running back into the intake pipe.

Get a catch can on it. My RB25/30 was dumping alot of oil out the breathers on back off on the dyno...

Also found it severly breathing oil on the track though too...

Link to comment
https://www.sau.com.au/forums/topic/295099-turbo-or-motor/#findComment-4922362
Share on other sites

Get a catch can on it. My RB25/30 was dumping alot of oil out the breathers on back off on the dyno...

Also found it severly breathing oil on the track though too...

yes mine also breaths heavy after a good thrashing or on dyno..

mite get a bit of oil in intake and front cover of turbo after 5000kms and hard thrashing

mite try just venting the breather with a filter.

just the smell annoys me smelling it breathe

Link to comment
https://www.sau.com.au/forums/topic/295099-turbo-or-motor/#findComment-4922466
Share on other sites

yes mine also breaths heavy after a good thrashing or on dyno..

mite get a bit of oil in intake and front cover of turbo after 5000kms and hard thrashing

mite try just venting the breather with a filter.

just the smell annoys me smelling it breathe

Put a catch can on, and plumb it all in properly.

This is what they're for!

Link to comment
https://www.sau.com.au/forums/topic/295099-turbo-or-motor/#findComment-4922523
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...