Jump to content
SAU Community

Recommended Posts

i got a r33 gtst [rb 25det]. i bought this couple of months a go. since that day, i install a aftermarket intercooler and change the timing belt as wel as spark plugs gap to 0.8 mm . from last 2 week when i brake the car suddenly [coluor lights etc] car revs down 0 and go up 8000-1000 [cant explain exacly...] and car stall. i can feel some thing cuts off. when i start again it will starts no probms.

i allready cleand the AAC valve, AFM as well.

somebody can help me to sort this out is highly appreciate.

Link to comment
https://www.sau.com.au/forums/topic/295331-car-stall-when-braking/
Share on other sites

My car is doing the same thing, since I cleaned my afm and replaced the intake pipe. Its definitely running lean off throttle causing the occasional stall.

Have you tried resetting the ecu? Make sure all the hoses are connected, like PCV as this will affect idle too.

Does the pedal sink all the way towards the firewall when it stalls, or does it stay consistant? Might be worth looking through the workshop manual, even the R32 one in the Brake diagnostic section.

Does the pedal sink all the way towards the firewall when it stalls, or does it stay consistant? Might be worth looking through the workshop manual, even the R32 one in the Brake diagnostic section.

i cant find brake diagnoistic system. do u have a one with u..?

Does the pedal sink all the way towards the firewall when it stalls, or does it stay consistant? Might be worth looking through the workshop manual, even the R32 one in the Brake diagnostic section.

i cant find brake diagnoistic system. do u have a one with u..?

if it only does it when you press the brake pedal then it is going to be in the brake booster. if it does it when you lift off and don't touch the brakes then it isn't the brake booster.

the brake booster has a vaccum line going to it to give you better braking. if the line is damaged or the diaphram in the booster is damage then when you push the brake pedal you are altering how much air the engine is getting and making it stall

  • 1 month later...

Guys,

Thanks all ur replyes. i have sort the problum. it was my automatic transmission transmission. i was run the car with very LOW FLUID LEVEL. that was the prob. if u got a same prob with auto car. check the trans fluid. and the same time u can see the engine light is on ur dash that is ur TCC - [Touque Convert Cluth] solonoide. no doubt

thanks again

if it only does it when you press the brake pedal then it is going to be in the brake booster. if it does it when you lift off and don't touch the brakes then it isn't the brake booster.

the brake booster has a vaccum line going to it to give you better braking. if the line is damaged or the diaphram in the booster is damage then when you push the brake pedal you are altering how much air the engine is getting and making it stall

Guys,

Thanks all ur replyes. i have sort the problum. it was my automatic transmission transmission. i was run the car with very LOW FLUID LEVEL. that was the prob. if u got a same prob with auto car. check the trans fluid. and the same time u can see the engine light is on ur dash that is ur TCC - [Touque Convert Cluth] solonoide. no doubt

thanks again

hey i got the same problem... can you tell me where the transmission fluid container is located??

i'm not sure if they have a seperate resevior or not. generally most cars will just store all the fluid in the gearbox and you simply pull out the dipstick for the gearbox and tip it in there. it's been a while since i had to top up an auto gearbox so i'm not 100% sure on that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
×
×
  • Create New...