Jump to content
SAU Community

Sau-vic Show'n'shine

R31Nismoid

By R31Nismoid,
in Archived Events

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

I can finally confirm the Show'n'Shine is ready to rock and roll.

It has been on the event Calendar for a couple of months, however final confirmation was only just received.

Date: Sat 21st Nov

Time:

Move in 9am-10am

Move out 3pm-4pm

This will be a static car display. You cannot come in later then specified, or leave earlier than specified.

Your car must be on display, and stationary for the duration of the Show'n'Shine due to the nature of the area and public safety requirements.

Location: Waterfront City, Docklands

Entry is via Pearl River Road - refer to map below for details, "X" marks the spot where Marshals for the event will be waiting @ 9am

There is a Tram Stop right out the front as well, Route 30 or 48

gallery_709_1130_88434.png

Car Limit: A limit of 80 cars is the MAX for this event. Should we run out of room sooner (due to larger cars), we will have to close the gates.

Obviously, Members only. Anyone from the public is more than welcome to come along and checkout the display, however you will not be allowed to enter your car.

How To Enter:

Upon entry onto the grounds you will be greeted by one of our Committee members and given directions.

If you wish to have your car in the Show N Shine and be eligible for voting you must notify our team.

You will be given a "Vote for me" sheet to place on your car with your details upon arriving.

Prizes and Awards:

Trophies will be awarded for "Best in Show" in the following main categories:

• Godzilla class (32, 33, 34 GT-R, one for each) & Best overall GTR

• Godzuki class (31, 32, 33, 34 GTS/GTT one for each) & Best overall GTS/GTT

• WRC class (WRX, Evo)

• Dorifto class (Silvia platform)

• Intruder class (other)

Use of facilities:

The following must be adhered to by all Members attending the day

- Strictly walking pace for cars, hazard lights ON at all times whilst in motion.

- No loud engine revving, starting of engines once stationary, silly compressor nuisance noises.

- No unwanted behaviour on (or when leaving) the park grounds.

- No dumping of rubbish.

IF members do not adhere to the above rules, Committee may ask you to leave. Keep in mind the club will be in the public spotlight and stupidity will not be tolerated.

Other Info:

- Bring whatever you may require for the duration, seats, hats etc. There is no leaving once you are in position until the end time of the show.

- The Piazza has PLENTY of food/beverage stores around, you will not need to go far for any requirements there.

- And issues on the day, see the people in Hi-Vis vests immediately.

Apologies for the late notice, I've only been advised of this

All cars must be Road Registered. So no towing race cars without some sort of rego.

Any questions please post up - see everyone there.

Cheers

Ash

Link to comment
https://www.sau.com.au/forums/topic/295444-sau-vic-shownshine/
Share on other sites
  • Replies 138
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Birds Grand Master

Birds

Posted
Posted

Also guys, this is an absolutely fantastic location...it's right in the middle of the shops/restaurants, so rest assured we will be receiving ALOT of attention from the public :)

R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted

There is no "signups" as such guys, its a case of whoever the first 80 are there, get in.

That said, we've never had 80 cars to a S'n'S in any year, thus far.

Closest we have come to 80 was in 2006 @ Birrung Mar. We had approx 65 form my rough counting of a photo.

So allowing for a bit of club growth, few more cars etc, the 80 'cap' should get everyone in is what i am hoping for here.

I just have to cap it due to space issues as i cannot use the entire pier due to restrictions of the venue chosen this year.

R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted
Not much notice, but I will try and get the R ready ;)

It's been on the Events Calendar for nearly 2 months now :)

So there has been plenty of notice. This is just the "details" thread.

You don't need details to lock a date into your calendar and/or get prepared do you? :D

I urge everyone to check the calendar regularly! I was unable to announce sooner due to a few issues with the venue/contacts etc.

Best i could do this time, ideally i would have had it up 2 weeks ago with further details.

I also announce things when i can @ General Meetings - pity attendance has been... 'lacking' of late :bunny:

Birds Grand Master

Birds

Posted
Posted

LOL Ash brings out the claws. It's true though guys, if you come to general meetings more often / print out the calendar then you will have all the notice you need.

Ash are you going to put down the list of attendance somewhere in this thread?

R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted

We have a committee meeting tonight - so i will bring that up.

Being you'll need to be a paying member to be covered by insurance, non-members won't be able to get out onto the Pier, we won't be letting anyone without a membership to move/enter a car.

RBPOWA-(TJ) Grand Master

RBPOWA-(TJ)

Posted
Posted
In.

Just as long as the car is there it is entered correct?

Reason I ask is I may not be bringing the car down personally.

should be plenty of spectating paying members to drive your car in. fits within the guidelines. (as your a member also)

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...