Jump to content
SAU Community

Power To Weight Rules And Engine Conversions?


Recommended Posts

So, i nearly have enough money saved up to purchase my first car however, finding a decent car is harder then i planned considering i don't have that much to spend.

anyways, while i love rb25s, i don't wish to purchase a R33 because of it's size and weight. on the other hand, i'd rather an engine with some low down torque thus ruling out the rb20 in the R32s.

so, would i legally be able to drive a r32 with a rb25 conversion?

please note, i only have to follow the 125kw/tonne rule, got my license before the turbo bans (luckily).

if not, i'd probably go back to looking at s14s.

My bet would be no.

The R32's just scrape in under that power to weight rule.

An RB25 would in theory put you over...

Also if you can't afford the conversion - have a search they are more expensive than you think.

I would stick to a stock example.

once engineered it goes off of the new motors flywheel figure and a weighbridge figure IIRC.

My turbo is laggier than stock, so a stock RB20 would be nicer to drive than mine :D

  RB_Ryan said:
once engineered it goes off of the new motors flywheel figure and a weighbridge figure IIRC.

My turbo is laggier than stock, so a stock RB20 would be nicer to drive than mine :D

i was in the same boat until i chucked in my cam gears

a hell of a lot less of lag and much better to drive

way more steetable

you should invest in a pair ;)

there is not much difference from a stock rb20 and rb25....

stick with the rb20. like i did. i always wanted a rb25 in my r32 but never happened the rb20 is soo good unless you want over 250kw in your case you don't so r32 rb20 ftw. trust me you'll love it....

  GTS-T_Sedan said:
i was in the same boat until i chucked in my cam gears

a hell of a lot less of lag and much better to drive

way more steetable

you should invest in a pair ;)

I have some... I am just used to motors that arent poo :D

  skline01999 said:
just stick with the r32 and do the the basic mods ppl are doing these days if you want abit of power injectors ecu turbo etc and it will be good enough for street on Ps

Nope....... Can't do any of that, apart from sticking to a R32 lol.

P platers cannot mod their cars to put out more power. They can rice it but can't do anything performance wise.

  Charles89 said:
Nope....... Can't do any of that, apart from sticking to a R32 lol.

P platers cannot mod their cars to put out more power. They can rice it but can't do anything performance wise.

Peter is old rules as I was.

I drove a lightly modded stagea for 2years of my P's without issue. also had a modded 1600, few r31's etc.

An R32 with RB20 or an S14 is best option for peter IMO, as if you need to make an insurance claim, best to keep it simple!

  Charles89 said:
Even with old rules, you still can't mod your engine to put out more power?

on old rules there is nothing wrong with upgraded exhaust and intercooler. Thats about all you can really do.

Larget turbos, boost controllers, ecu tunes, larger injectors etc are all illegal regardless of P-Plates or not.

old rules, everything goes that's legal(not that much really is considering EPA) as long as the car doesn't go over 125kw/tonne.

rb20s lack the torque, 25s have far more stock (267nm vs 330nm to memory). i planning to keep the car for a good few years when i buy it, so rather not muck around with a conversion after 6months. thought it would be easier just starting with a 25 in a r32.

probably keep looking for s14s.

  Peter89 said:
old rules, everything goes that's legal(not that much really is considering EPA) as long as the car doesn't go over 125kw/tonne.

rb20s lack the torque, 25s have far more stock (267nm vs 330nm to memory). i planning to keep the car for a good few years when i buy it, so rather not muck around with a conversion after 6months. thought it would be easier just starting with a 25 in a r32.

probably keep looking for s14s.

R32 then engine conversion when off p's... its not just the peak torque of the 25, but the power delivery in general...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nice one, I'd argue that the white S1 RS260 is certainly the best looking of the Stageas. And yes, fully agree on the forum situation. It's a bit of a shame, but at least SAU is a good place to be. I found the facebook groups to give me FOMO because people were trying to one-up each other and show off in some way. Feels much more natural here. There are people with seriously nice builds, but I can appreciate it rather than it making me question my life choices. Might be that people are more open with sharing how much work/money/suffering it takes to actually get there. 
    • Evening, wanted to pop in and finally register to say hi to everyone here on SAU!   It's been a while since I've been active on a forum, but back in the day I used to be relatively active on ClubLexus and other hobby-related forums. I'm glad to see SAU is still around, since with the advent of Facebook and Discord it seems forums aren't what they once were. As a recent new owner of an S1 260RS Stagea, I've found so many older guides and helpful tips from SAU that I figured I needed to join and say a grave thank you. My recent acquisition has only become legal in the US for the past year, and knowing that similar car enthusiasts from across the pond have already figured out the kinks and tricks to get these 25+ year old cars running well. I look forward to diving into more of the SAU forums as well as hopefully contribute some info myself for future posterity.   As a pic tax, here is one of the few good photos I have of my Stagea. I hope to get way more in the future!    
    • Is this where I say "Hey man my airbox cost me horsepower in my Naturally Aspirated Engine"? (I know you need them for legality in NSW)
    • 1.5mm alloy folded up, it will need a tweek, as the angled bend only got to around 45° as that was the max that the break press would get with the other bends, and I needed a fair bit more, but and the alloy is easy to bend too my will by hand once I trim the lower section out I'll Dremel out and form the angle and mounting point on the lower section when time permits  As for the lid, I'm looking at going a "cap", instead of a flat lid to hide the fixtures a bit
×
×
  • Create New...