Jump to content
SAU Community

Recommended Posts

Im looking to purchase a 1995 ER33

In the description it says TURBO coupe however the title says ER33 GTS

Ive tryed looking back at previous threads on ER33 and the meaning but no one has ever answered that ER33 stands for N/A coupe....

does the ECr33 (c stand for Coupe???)

Ive attached some pics

Fromt he stock wheels i can see 5 studs...

and the engine bay...well i wouldnt have a clue lol

Could someone plz anyalyse the pics and tell me from the engine shot if its a turbo if u can lol

Thanks in advance for any replies

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/
Share on other sites

and is it a series 2?? or series 1

It's a series 1.

You can also see that it doesn't have ABS (the ABS unit usually sits at the top righthand side - looking at the pic), and it's possible that it's got aftermarket suspension as the strut tops don't look like the factory ones.

Bit hard to tell, but it looks like there's a white plastic T off of the fuel pressure reg too. Might mean there was/is a after market boost gauge.

Oh - last one (LOL), also looks like the factory boost solinoid has been taken out or has been moved.

J

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/#findComment-603673
Share on other sites

Also it isnt a  series 1.5 front is it

So what would you rekon the RRP of this sorta car would be ??? ball park rough figure

Think it could be a series 1.5 looks almost exactly the same as my series 1.5. I think I can just make out a series 2 spoiler on the back??? Should make it a 95 series 1.5 (officially series 1 of course). I think the black around the front lights is also a sign of series 1. Seems to have cut away some of the front grill.

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/#findComment-603774
Share on other sites

It looks like a 1.5 to me. Sewid's the expert on the differences between series 1 and 1.5/2 engine bays because he's compared them directly and made mental notes, maybe you could pm him and ask.

I wouldn't pay more than $20k for a realtively stock '95 model. Probably considerably less.

Btw I think it might be a Nismo grille. A friend of mine sold one awhile back and it looks pretty similar.

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/#findComment-604150
Share on other sites

Yeah its hard to tell from these photos but it looks suspiciously like Series 1.5. I can only judge this by the pink plate on the AFM. Series 1 that I have seen have green plates. This could just be a batch thing though, or even a replacment afm.

Jimx what colour is your AFM's plate?

It's not series two but we all knew that.

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/#findComment-604447
Share on other sites

It's a series 1.

Oh - last one (LOL), also looks like the factory boost solinoid has been taken out or has been moved.

J

No the factory boost solenoid is still there, it's just to the right of the power steering fluid reservoir.

Link to comment
https://www.sau.com.au/forums/topic/29579-er33-turbo/#findComment-607900
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...