Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

The Jun motor ran 13.6@190kmh Ants car ran 11.7@209 with wild wheelspin.The bullshit stops on the track.

No other street SR has gone 130mph so yes it is WAs wildest- No ELF fuel used as in the Jun job And Ants makes this power on a Dyno Dynamics dyno with Accredited shootout The Jun car was on a Dynojet that is WA famous for funny power readings But as i said the "Bullshit stops at the track" Prove us wrong Denver but don't make excuses as Ants car has plenty of those also.We can arrange a meeting at the Plex if you like.

Bring the Red S14 down also and run it against a near stock (pistons+ Rods only internal mods)S13.PSI2FLY.

steve, i thought it made 5 somethin on the formaz dyno ? is theres a dynojet ? what were the driving skills like when it did a 13.6 ? just curious as a guy i knows s14 ran 12.8 last wednesday on street tyres and his just has gtr fmic, zorst and 1 bar boost ?? am i missing something ??

also what sort of boost was ant's 1600 runnin when it made 440 rwhp ? 30 odd psi ? what hp could u expect from it on say 15-20 psi ?

*sigh*

It made 730 on ivans dyno recently too steve, as for the track, it was never in a propper drag car, it was never intended to get a quick time that day, put the slide rule calculator away for now..

Show me anyone who can put 700hp through a 255 radial tyre, and not have a 400 meter burnout

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...