Jump to content
SAU Community

Recommended Posts

Last i'd heard it was stolen.

Standard Datsun 1600 rear end is a lot worse that an S13 club race cars and the Dat was on 225 street tyres.

Lots or us watched and their was no 400m burnout.

PS Denver you started this one.

Just for Denver i will retitle this thread WAs fastest SR street motor is for sale.

And its didn't come in a box from Japan

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

started it?, someone asked a question, i posted an answer, you posted your usual 'but it never made the time at the drag strip' response, in actual fact you started it, my reply was _not_ intended for you, it was intended for pisnnissn..

and yes i know ant has a 1600, he also has 300hp less, he also didn't have any traction till 4th gear...

Oh, and no it hasn't been stolen, ill add that to the rumour pile..

and you'd be wrong by claiming its the fastest sr too, the 11.4 tangy's s13 set some years ago still stands as the fastest sr pass in wa.

You live by the bullshit stops when the track times comes up, maybe its time to take a page from your own book eh steve..

Yes it did do 11s but not with the Jun motor or a Speedworks motor for that matter,but the car was gutted and on slicks on a prepped track driven by Jason weston. PSI2FLY just did an 11.5 on a wed nite as a streetcar Same as the red S14 with full jun stroker and HKS gear box etc etc etc. Ants 130mph is the fastest 1/4 speed ever.

Ian balls 8.5 is the fastest SR (With a Wolf)pass but we are talking true streeters here.

AJs gonna tell you of again if you keep this up.

You should set your Wrecks up for 3J and beat me next season Denver.

For a backyard build up Ants sr20 absolutely shits on any sr's that some so called performance shops have turned out. Not mentioning any names.

And the fact that it didnt arrive in a box just adds further to the excitment when it lays down the CHOP CHOP.

:blast: :blast:

Ant's made

440 odd at Dyno wars

399.4 at plex sports compact day - with rumours of the dyno being loaded up against it ( i said rumour so dont jump on me saying im a lier but its a whisper ive heard)

440.8 in shootout mode at SAU dyno day in front of many people.

Ive not seen these speedworks cars make power elsewhere then at speedworks..... im not saying that these cars dont make power but this sounds like a good idea ... get em out on another dyno .. Since Steves at SST is accredited it sounds like the best place to do it ... hell ill even video the whole thing and host it so it can be called fair.

Im not taking sides but evidence speaks volumes.

Strip can be become biased and comes down to driver skill / willingness to kill the car

Ants datto is what? 950kgs so ppl will just claim its lightweight plus its got 1972 suspension geometry's and crap tyres. Id love to see it on Nitto's or Street drag radials.

the s13 / s14 weigh more and have much better suspension so it will become another he said she said slinging match - just get on the same dyno at the same time.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...