Jump to content
SAU Community

Recommended Posts

  • Replies 1.4k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

isn't that Friday the 21st? competition Saturday 22nd?

Now im confused - from the assigned 5 sessions - surely a couple of these would be practice and surely on the Fri? or maybe 1 session per day?

http://www.superlap.com.au/2009/?p=2278

Edited by HKS26T

Thanks for that Steve. Pity there isn't one closer though, was really hoping for an open day on the 19th/20th.

Harry: I think both days are competition mate. I was hoping to get a good day in prior.

Some bling bits just arrived for The SLot Car.

We discovered this billet alloy dry sump set up made in USA for our VQ30 twin turbo motor we are fitting. It is a girdle, sump, oil air separator, dry sump pump and oil filter bracket all in one. THe motor will be more reliable, help piston rings seal better, less drag for crank, both indirectly making more free power. so more power, less weight in front, as oil tank will go in left rear of the car. Also allows us to move the engine further back and lower, lowering the weight in the car, allows us to raise the steering rack to get rid of bump steer, rather than spacing the outer steering pivot point down. It also allows us to run a better front air dam in under tray, as has more clearance.

The new motor should have us well under 1150kg and much better balance front to rear and left to right as mounting the oil tank left rear allowing us to remove 10kg of lead.

DSCF8774.jpg

DSCF8773.jpg

Cosworth Plenum on way.

cosworthvq35low_7_general.jpg

6Boost making exhaust manifolds and GCG supplying turbo's.

wow sub 1150kg sure is light! :P

When we do carbon fibre tailgate with Perspex window and carbon front bar, it will be well under 1100kg. Then have plans for building a 3.8 litre VQ with VQ35 crank and Darton Sleave kit, which we have, and will be easy 500plus rwkw, maybe for next year. Also have plans for custom Chrome Molly front suspension, getting rid of the heavy king pin and upright, this should save many kilos off the front suspension, through in traction control and looking at Ikea Sequential shift kit with ignition kill and we might only be a mile away from the big guns rather than miles.

Thanks for that Steve. Pity there isn't one closer though, was really hoping for an open day on the 19th/20th.

Harry: I think both days are competition mate. I was hoping to get a good day in prior.

There is a ARDC supersprint the weekend before on the 16th is a round of the CAMS Supersprint Championship, would be hard to enter unless you are registered in the Supersprint championship as you get first preference, but worth a shot. I will be running the Mazda R100. When i get entry forms will let people know and then you could contact the ARDC.

There is a ARDC supersprint the weekend before on the 16th is a round of the CAMS Supersprint Championship, would be hard to enter unless you are registered in the Supersprint championship as you get first preference, but worth a shot. I will be running the Mazda R100. When i get entry forms will let people know and then you could contact the ARDC.

Thanks for that mate, would really appreciate it.

John: Z sounds like it's coming along nicely, should be even more of a weapon soon.

So I hear on the grapevine that the Scion is coming from the States!

It's apparently now up to 1200hp and has undergone a 4WD conversion with a custom billet alloy cased gearbox! I also hear he's flying the thing over! haha

I think the entry list is nearing 10 internationals, which would be awesome!

I was giving some private tuition to a couple of guys yesterday at the creek who are both running in clubsprint. Far out, there are some fast cars around. R33 GTR in clubsprint spec doing a 45.4 on a hot day is not mucking around. Also good to see Lofty out there with the BSM R32 GTR doing some serious testing. They were pulling 280kph down the chute and were well below the 40 sec bracket :D

Alright whos the one spreading rumours a Viper and Mustang are coming over aswell from the states???

Not happy...got all excited only to bfind out its not true! :cool::cool::D

P.s should get Tacker to come over! :/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...