Jump to content
SAU Community

Recommended Posts

Hi everyone.

I want to paint My calipers :P

Dont knw what colour will suit my car!

I have photoshopped it pretty bad but what do you guys think in red?

redcalipers.jpg

Also is it alright to paint the brake pad too?

Because on my calipers u can see the top surface of the brake pads?

reason im asking is because i wont be taking off my calipers ( Dont know how, Im a newbie)

So im just gonna use masking tape.

What other colors you think will suit my setup?

Thanks People

Link to comment
https://www.sau.com.au/forums/topic/296518-painting-calipers/
Share on other sites

Cover your brake pads up...paint only the calipers...and personally, I'm a huge fan of Gold...the nice and darker Gold colour would look tough! Red is a bit outdated and rather too loud in my opinion.

Gunmetal or dark gold would look pretty good - goes well with darker wheels.

Red would be good if you had white/light coloured wheels or if you had a wheel design with a chrome lip.

If the weather is good this weekend - I'm gonna paint mine satin black - I have stock GT-T wheels

They do look nice but you got those nice GTT Calipers :3some:

I dont have them :rolleyes: I got those crappy looking GT calipers.

I think (non-turbo) calipers are best coloured dark gold or any other dark metallic colour.

Silver is ok too - kind of stock looking (think Honda Accord Euro) but gives you a nice factory fresh finish.

If you paint them red (or any "loud" colour) they kinda look undersized/ricey as it draws alot of attention to the caliper - due to the contrasting colours.

Definately each to their own I say.

They do look nice but you got those nice GTT Calipers :3some:

I dont have them :rolleyes: I got those crappy looking GT calipers.

spend the money and get some good rotors and calipers like i did :D

Otherwise its probably not worth painting the GT calipers as it just looks too small and lets face it they arent exactly attractive calipers..

Stealth up the calipers and do them Satin Black or something.

gold is cool mine are gold.

tip dont get any of anything on ur rotors or on the surface of ur pads

preparation is key the cleaner the caliper the longer the paint will stick

i used a lacquer based paint (standard automotive no heat bullshit) and it has last a long time

for cleaning use a wire brush, old tooth brush, and brake rotor cleaner (stronger than degreaser)

and if u get sick of one color than change it only cost $20 and a night

omfg do each a different color

I think (non-turbo) calipers are best coloured dark gold or any other dark metallic colour.

Silver is ok too - kind of stock looking (think Honda Accord Euro) but gives you a nice factory fresh finish.

If you paint them red (or any "loud" colour) they kinda look undersized/ricey as it draws alot of attention to the caliper - due to the contrasting colours.

Definately each to their own I say.

Agreed!

Silver can look quite tough though with the right size discs and coloured rims :down:

I got sick of my Gold calipers so I decided to go racing red (has a tinge of orange in it) ...hot....damn, I gotta say, Gold looks nice and subtle but racing red is purely sex especially if you have huge calipers like I do on my R33.

This is what I did...got grease remover - have it a good clean, then used metal sand paper to side it all down smoothly, then gave it 2 layers of primer...allowing 30 minutes for each coat, then spray 2 layers of the red heat-resistant paint onto the calipers and allowed 45 minutes for each coat.

Looked awesome!

you can remove the pads without taking off the caliper mate
They do look nice but you got those nice GTT Calipers :D

I dont have them :)I got those crappy looking GT calipers.

im pretty certain my above quote is incorrect for the non-turbo calipers. But you can probably still paint those calipers without disassembling them and removing the pads - just mask it all up nicely, and try not to get any paint in there

Hi everyone!

well......... after all the thankful feedback i got, i still decided to go with red :rofl:

I used Dulipcolor Metalcast Red

for me i reakon it turned out great.

cimg1319e.jpg

For those who know, whats a safe drying time until i drive me car again? so far i left it to t dry for 2 days.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...