Jump to content
SAU Community

Recommended Posts

I cant find any actual guides on how to do it or where your meant to drain and fill it up from?

Has anyone got any pics of where you need to drain and top it up? or can you explain where it needs to be done cause my car definately needs it.

Technically its not that hard....

There is a drain plug on the bottom of the gearbox, you cant miss it,

it in the centre right at the lowest part of the gearbox.

The filler plug is half way up the passenger side of the gearbox, just follow up

from the drain plug.

When you do it clean the metal shavings of the metallic drain plug, and easier if you use a hose into the filler plug to fill.

I havent been able to do it yet, i couldnt get the filler plug off (car wasnt high enough of the ground!)

And its exactly the same for the diff...

as nissky said, thats all correct. The plug is a bitch to get off, and make sure u can take off the filler first, (if u drain first then can't undo it, ure fkd :D).

Really need a hoist to make it easier, and probably worthwhile to pay joe mechanic $30 to do it for u.

Ill also vouch for redline :(

as nissky said, thats all correct. The plug is a bitch to get off, and make sure u can take off the filler first, (if u drain first then can't undo it, ure fkd :)).

Really need a hoist to make it easier, and probably worthwhile to pay joe mechanic $30 to do it for u.

Ill also vouch for redline :)

You arent ****ed in a way. I have done it on the ground a few times and have always been able to get it off with a 17mm spanner, although its a long one, but if you cant then just fill through the gear stick on a Gtst. It ussually takes about 2L.

unless u have 1/2 decent tools just get a mechanic to do. the ease of the job will be mostly dependant on how tight the last person to change the oil did the bolts up. based on how hard my side plug was done up i have visions of an overmuscled, non-too-bright lad doing the last oil change on my car

Do you have to change the filter on the Manual gearbox? Is there a filter on the Manual boxes?  

I know that when changing oil on an auto box, you need to replace the filter aswell. Is this true for the Skylines?

there is no filter on a manual box. The bottom drain plug is magnetic to collect metal particles though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
×
×
  • Create New...