Jump to content
SAU Community

Changing the gearbox oil in an R32 GTST?


inark
 Share

Recommended Posts

I cant find any actual guides on how to do it or where your meant to drain and fill it up from?

Has anyone got any pics of where you need to drain and top it up? or can you explain where it needs to be done cause my car definately needs it.

Link to comment
Share on other sites

Technically its not that hard....

There is a drain plug on the bottom of the gearbox, you cant miss it,

it in the centre right at the lowest part of the gearbox.

The filler plug is half way up the passenger side of the gearbox, just follow up

from the drain plug.

When you do it clean the metal shavings of the metallic drain plug, and easier if you use a hose into the filler plug to fill.

I havent been able to do it yet, i couldnt get the filler plug off (car wasnt high enough of the ground!)

And its exactly the same for the diff...

Link to comment
Share on other sites

as nissky said, thats all correct. The plug is a bitch to get off, and make sure u can take off the filler first, (if u drain first then can't undo it, ure fkd :D).

Really need a hoist to make it easier, and probably worthwhile to pay joe mechanic $30 to do it for u.

Ill also vouch for redline :(

Link to comment
Share on other sites

as nissky said, thats all correct. The plug is a bitch to get off, and make sure u can take off the filler first, (if u drain first then can't undo it, ure fkd :)).

Really need a hoist to make it easier, and probably worthwhile to pay joe mechanic $30 to do it for u.

Ill also vouch for redline :)

You arent ****ed in a way. I have done it on the ground a few times and have always been able to get it off with a 17mm spanner, although its a long one, but if you cant then just fill through the gear stick on a Gtst. It ussually takes about 2L.

Link to comment
Share on other sites

unless u have 1/2 decent tools just get a mechanic to do. the ease of the job will be mostly dependant on how tight the last person to change the oil did the bolts up. based on how hard my side plug was done up i have visions of an overmuscled, non-too-bright lad doing the last oil change on my car

Link to comment
Share on other sites

Do you have to change the filter on the Manual gearbox? Is there a filter on the Manual boxes?  

I know that when changing oil on an auto box, you need to replace the filter aswell. Is this true for the Skylines?

there is no filter on a manual box. The bottom drain plug is magnetic to collect metal particles though.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I think last I checked it was 35cm from fender to wheel center. I heard u can go up to 45-48cm before handling his impacted. But I need to check again. I know I was about 1.2 cm off being close to max recommended. 
    • You'd need to weld on an external gate to achieve that number though. I can't remember seeing anyone make 500hp at the wheels with the stock manifold / internally gated turbo.
    • Suspension Component Question Looking for some feedback based on people's experiences! I know this has been loosely covered in other threads but I can't find any direct answers/experience. I'm up for some bush/rod replacements and was interested in a hybrid approach between hardened rubber and pillowball kit. Why not choose one or the other? Well, this is for my daily driver, which I track once or twice a year. I like a stiff car and a sporty feel but I don't want to compromise the chassis too much with 100% pillowball gadgetry.  I know from experience and a tonne of reading that not all components affect ride quality in the same way - eg. in my case, coilover top mounts should be hardened rubber as pillowball transfers way too many undesirable qualities and doesn't have much more upside than a good hardened rubber. But, pillowball tension rods translate to much better turn-in/steering response and make the car significantly sharper, without negatively impacting ride quality in a significant way.  I'm not TOO bothered by NVH (to a degree). So, with context out of the way, does anyone have any experience with a hybrid approach as mentioned above? I'm going to replace all components over time so am seeking guidance on: - front tension rods - upper camber arms - rear lower control arm - rear traction rod - rear upper camber arm - rear toe adjuster rod  Secondly, is there any reason why this is a bad idea? Or any other info/wisdom that I might not be considering. Cheers 🫶
    • That's good to hear I'll stick with the stock I hear they are good for 500hp and I'm only shooting for 350-400 once I can get this thing sorted and get to actually building it. 
    • The stock one will outperform any aftermarket standard position exhaust manifold. If you don't believe me, do a back to back test (same turbo, same boost, same timing) and you'll be super surprised.
×
×
  • Create New...