Jump to content
SAU Community

Recommended Posts

So use r33 sensors?

But then these have to be bent to clear some other pipework or cabling don't they?

Maybe I should just go the Tomei's. I already have a good aftermarket front pipe but I don't the its as wide as the tomei outlet.

Go tomei, the trust ones are a pita, i swapped mine out about a year or so ago..

my new front pipe wasnt quiet as big as the tomei outlet either but a die grinder made it a little better for flow.

Make sure you got the gtr one and not the vspec ones. They should all fit perfectly (maybe o2 will need some work) across all 3 models but the 34vspec has extra o2. No biggy, just need to find a bolt or bung to seal it up.

Why bother with the O2 sensor?

The RB26 is not a fuel efficient engine and having the O2 won't help much.

I changed my Mines dump and front pipe, which is similar to the Tomei dump, to the Greddy and gained a few hundreds rpm of boost response.

BTW does your Greddy front pipe have a flex pipe? If it doesn't, it would be best to get one installed.

ORIGINAL Trust pipes come with adaptors, so it doesnt matter what O2.

be careful of copies though. There are a solid number of cheap knockoff's floating around for a while whose flanges etc were all uneven, different sizes etc.

Thanks everyone, I have spotted a genuine set. Just know there are mixed opinions about these pipes.

The only reason I am considering is because the price is not much more than tomei dumps.

they are the best flowing kit on the market.

I actually think there was a set going cheap at autobarn narre warren when i was down there last, nearly bought it as a spare.

Edited by URAS

Just be mindful about the O2 sensor types, R32 GTRs use a Titania based sensor, while 33's and 34s use a Zirconia based sensor, you can't use a Zirconia based sensor on the R32 GTR ecu (well you can, but it won't work as well).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...