Jump to content
SAU Community

Recommended Posts

I have a R33 1994 model with 110,00klms

Mods

3inch exhaust from back of turbo

greddy profec spec 2 boost controler

standard airbox with K&N

Bosch 040 fuel pump

running 100 octane everyday( i have it available at some local servos)

Standard turbo running 12 to 13 psi max

Trust side mount aftermarket intercooler( 240wide, 195 high, 100mm thick core) I want to keep the car looking original but making decent power.

HOW MUCH CAN THIS SMIC FLOW?

I have Power fc

z32 air flow meter

sard 850cc injectors

sard fuel pressure reg

i am planning on putting this gear on car when i get it tuned at Unigroup( yavuz is the man for powerc fc tune so thats where it is going)

Can anyone tell me what i should expect out of this set up ...kw at wheels

Im planning on putting full slicks on the skyline after tune and taking it to eastern creek to chase high 12s

Edited by manuel

Read this? http://www.skylinesaustralia.com/forums/Pr...T-Da-t9445.html

Maybe 180rwkw Trust sidemounts are meant to be decent, the 34SMIC is meant to be fine for 220rwkw. and cheaper

IMO, don't fit the fuel press reg, will look stock.

Are you aware the K&N is an oiled element filter? AFM's don't like this. I personally would change it before fitting the Z32.

Same as everyone else mate... (re: dyno results thread)

190-200rwkw legitimately.

I was running 12.9's with 220rwkw. So if you'll be able to get a mid 12 on slicks, if not even lower depending on how you drive.

Read this? http://www.skylinesaustralia.com/forums/Pr...T-Da-t9445.html

Maybe 180rwkw Trust sidemounts are meant to be decent, the 34SMIC is meant to be fine for 220rwkw. and cheaper

IMO, don't fit the fuel press reg, will look stock.

Are you aware the K&N is an oiled element filter? AFM's don't like this. I personally would change it before fitting the Z32.

thanks for the advice mate.

im lucky i got the trust side mount for $100 bucks, very lucky i guess so hopefully will be good upgrade.

Your right about K&N, Shift performance have stainless steel high flow dry panel filters for $60, i will change it soon

If i can make between 200 and 220kw @ wheels with standard turbo i will be very pleased. I will keep you guys posted early next year when its tuned.

As for quarter mile i have run high 11s in my sr20 ke20 corolla with slicks. Only had 180kw at wheels with car weight of 950kg.

Good tires+good suspension+experience=Drag racing . power figures mean shit unless you get it all down to the tarmac and produce the times. time slip tells the story, not dyno figures.

I am not sure on your trust smic but i can tell ya with my ARC R34 smic and some other mods on a stock turbo R33 I make a 211rwkw @ 10psi. Dyno was done at Creatd in Melbourne on BP 98 pump fuel. Car has run 13.3 @ 109mph at heathcote test n tune with current setup on street tyres but it is more set up for circuit/hill climb use.

Other mods - 3 inch bell mouth front/dump - apexi hi flo cat - hks silent hi power cat back - hks spark plugs - hdi dual ebc - apexi safcII - hks panel filter - custom intake pipe - 040 fuel pump - orc clutch + light flywheel.

I like the idea of stealth so everything i did is hidden - black piping in the engine bay - concealed ebc and safcII in cabin. I got a mate who is a TMU cop to have a look over it and he had trouble finding anything I had done.

If you make over 200rwkw you'll be lucky. Also, why on earth would you get 850cc injectors when the stock ones will do the job for a lot more than what you will be pushing??

Edited by PM-R33

And the fuel reg etc etc... lots of useless parts in that list.

850cc will flow 400rwkw+, why then you'd need a fuel reg on TOP to get even more flow, beyond me.

Even the Z32 is a waste of time.

looks like 200 to 220kw is achievable, thanks guys.

Also reason i have sard 850cc injectors and fuel reg is cause i got them so cheap . like i said the standard turbo will be history some time next year and then its Garrett time baby. The injectors will support my goal of achieving around 280kw. If i dont need the fuel reg at this point then im happy to sell it to some one that needs it more than me.

Z32 air flow will provide a much better tune, refined rather than power , i know this....

Anyway thanks for the feedback boys, this site is a source of knowledge, a good reliable resource.

And the fuel reg etc etc... lots of useless parts in that list.

850cc will flow 400rwkw+, why then you'd need a fuel reg on TOP to get even more flow, beyond me.

Even the Z32 is a waste of time.

Hey (R31 Nismoid) f**kwit...this has nothing to do with this post...but thought i would share what im about to say with everyone since you closed my topic for no f**king reason! guess what asshole i dont need to use SAU anymore...iv noticed its only cheap flamin mongrels that use this site only another version of ebay! i reported some1 and the least you could say was not to worry about it and i would have been happy! but u decided to be some hard flamin mongrel and f**k it up for me! f**k u and ur shitbox R31...shove it up ur mums ass u f**king top bloke! lol seems like ur power hungry going around to peoples topics and closing them for no f**ked up reason! just coz ur a stupid low life administrator...who gives a shit...and u cant do jack shit about what im saying!

flamin mongrel...

I had a trust smic in my Stagea but destroyed it when i wrote the car off and found a nismo one for my next stagea. the smic should support up to 230awkw (I made that with a GCG highflow) and the arc version (the 100mm thick one) will probably support about 240awkw although may need a water spray on high boost if you are in a hot climate. 280kw is acheivable with 550 injectors so stock fpr should be fine.

looks like 200 to 220kw is achievable, thanks guys.

Also reason i have sard 850cc injectors and fuel reg is cause i got them so cheap . like i said the standard turbo will be history some time next year and then its Garrett time baby. The injectors will support my goal of achieving around 280kw. If i dont need the fuel reg at this point then im happy to sell it to some one that needs it more than me.

Z32 air flow will provide a much better tune, refined rather than power , i know this....

Anyway thanks for the feedback boys, this site is a source of knowledge, a good reliable resource.

Hey (R31 Nismoid) f**kwit...this has nothing to do with this post...but thought i would share what im about to say with everyone since you closed my topic for no f**king reason! guess what asshole i dont need to use SAU anymore...iv noticed its only cheap flamin mongrels that use this site only another version of ebay! i reported some1 and the least you could say was not to worry about it and i would have been happy! but u decided to be some hard flamin mongrel and f**k it up for me! f**k u and ur shitbox R31...shove it up ur mums ass u f**king top bloke! lol seems like ur power hungry going around to peoples topics and closing them for no f**ked up reason! just coz ur a stupid low life administrator...who gives a shit...and u cant do jack shit about what im saying!

flamin mongrel...

Good.

Piss off - you're banned.

looks like 200 to 220kw is achievable, thanks guys.

Also reason i have sard 850cc injectors and fuel reg is cause i got them so cheap . like i said the standard turbo will be history some time next year and then its Garrett time baby. The injectors will support my goal of achieving around 280kw. If i dont need the fuel reg at this point then im happy to sell it to some one that needs it more than me.

Z32 air flow will provide a much better tune, refined rather than power , i know this....

Anyway thanks for the feedback boys, this site is a source of knowledge, a good reliable resource.

Mate dont put the parts in now. You do not need to do so! :)

- Z32 does not offer a more refined tune. It is actually less refined due to the AFM resolution.

- Larger injectors, harder to tune/fuel economy issues possible

- Fuel reg, just simply not required (i'd sell it, factory is tried and proven over 350rwkw :()

Honestly leave ALL the parts factory and put them on when you upgrade the turbo. You'll have to get a retune anyhow so fit them at that time.

I've had similar parts sitting in my bedroom for 2 years, simply because i don't need them. No point putting wear and tear on items for no reason.

It's great you are prepared parts wise, but there is no benefit to putting anything in now with the factory turbo.

Mate dont put the parts in now. You do not need to do so! :)

- Z32 does not offer a more refined tune. It is actually less refined due to the AFM resolution.

- Larger injectors, harder to tune/fuel economy issues possible

- Fuel reg, just simply not required (i'd sell it, factory is tried and proven over 350rwkw :( )

Honestly leave ALL the parts factory and put them on when you upgrade the turbo. You'll have to get a retune anyhow so fit them at that time.

I've had similar parts sitting in my bedroom for 2 years, simply because i don't need them. No point putting wear and tear on items for no reason.

It's great you are prepared parts wise, but there is no benefit to putting anything in now with the factory turbo.

Why do people upgrade to the z32 air flow meter?

Should i sell my fuel pressure reg?

Should i down size my injectors to 550cc for better fuel economy and tune capabilities?

Value your opinion.

Why do people upgrade to the z32 air flow meter?

Should i sell my fuel pressure reg?

Should i down size my injectors to 550cc for better fuel economy and tune capabilities?

Value your opinion.

The standard AFM can only detect a certain amount of airflow, and upgrade to the Z32 when pushing 250+rwkw(i think)

Don't put bigger injectors in till you upgrade your turbo, the standard items are good for about 240rwkw+

Hey (R31 Nismoid) f**kwit...this has nothing to do with this post...but thought i would share what im about to say with everyone since you closed my topic for no f**king reason! guess what asshole i dont need to use SAU anymore...iv noticed its only cheap flamin mongrels that use this site only another version of ebay! i reported some1 and the least you could say was not to worry about it and i would have been happy! but u decided to be some hard flamin mongrel and f**k it up for me! f**k u and ur shitbox R31...shove it up ur mums ass u f**king top bloke! lol seems like ur power hungry going around to peoples topics and closing them for no f**ked up reason! just coz ur a stupid low life administrator...who gives a shit...and u cant do jack shit about what im saying!

flamin mongrel...

You didn't follow rules for creating a for sale topic, it got locked, harden the f**k up and get over it instead of having a fit and making yourself look like an idiot.

"Cheap flaming mongrels use this site"....umm yeah, we are all cheap, hence most of us spend stupid amounts of money on cars and there is probably some of the most expensive modified cars in Australia on this site....good logic.

The admin and moderators do one of the best jobs of any car site i have visited and this is probably one of the best sites for information and keeping f**kwits out, funny how most of us don't have problems...

Edited by PM-R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...