Jump to content
SAU Community

Recommended Posts

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

K&H has recently been purchased by 3M products, and have been on par with their tinters, fillers, putties, primers and other various products for quite some time.

GMH Matt Black is the colour you used, yes?

Doesn't matter if it rubs off man, really doesn't. wash it, dry it, hit it with a rattle can and enjoy the f**k out of the hardcore street cred a rattle-can job gets you. lol.

i did it rattle can because i didnt want to have to worry too much over the paint job lol even tho im getting graphics, they arent gonna be anything like what the 34 has on her.

but yeah id say the K&H stuff is prob a lot better than the cheap as chips rattle can paint lol :P

  • 2 weeks later...

lots of things (dosent feel like it tho lol) have been done with the 31 latley........all door trims are now with aluminum, handbrake has been removed, coolant system has gotten a really good clean out, tacho has been installed....complete with shift light the size of a 20c piece lol......gauges have been dummy fitted and just need to be hooked up......tow bar is removed.

managed to finally get a few practice launches with her....not as easy as what i thought (a lot easier in the R34 which is manual, mainly cause i can hold the revs as high as i like but with the 31 she isnt budging over 2 grand atm) however in saying that im not getting any wheelspin which is definelty a good thing for sure......when she picks up after the launch she goes hard and frikin fast i couldnt believe how well she actually went..........im definelty going to be looking into maybe going to heathcote later on the year to see how she goes on the 1/4 mile.

anyway thats about it for now will be posting up pics soon :)

lol

nah the graphics for this creature are gonna be pretty simple, gotta have all the sponsors on there but will have a two tone effect with some gloss black "tribal/swirl" graphics happening.

what do you get from these "sponsors"? my car is covered in stickers from differnt places aswell, but i dont get jack from them.

Im very suprised people are sponsoring the car when its not even close to being finished, nor is there a drag strip in SA...so i cant really see local company's sponsoring a "drag Car' when there is no where in SA for you to race and give them their exposure.

Not trying to put you down or any thing like that, and I'm hoping that this blown adventure is not as optimistic as the last one.

what do you get from these "sponsors"? my car is covered in stickers from differnt places aswell, but i dont get jack from them.

Im very suprised people are sponsoring the car when its not even close to being finished, nor is there a drag strip in SA...so i cant really see local company's sponsoring a "drag Car' when there is no where in SA for you to race and give them their exposure.

Not trying to put you down or any thing like that, and I'm hoping that this blown adventure is not as optimistic as the last one.

well i approached different places for different things....like Discount Steel Supplies i asked for the steel for my roll cage......

and there is drag strips here in SA......they just arent 1/4 mile ones........but as the saying goes you have to run 1/8 mile to get to the 1/4 mile . lol

whyalla, coonawara, portland are the main ones, then mildura isnt far from me (about hour and a half) and then there is the big trek to Heathcote which will hopefully be happening later on in the year :D

have you ever been on the drag strip?

its more of a saftey thing than anything else. accidents do happen on the strip and it only take a split second for it too happen. what if i was to go up against a high hp car (and with the test and tunes you go up against anything) something happens and it slames into mine cause its crossed lanes? then what? i smash into the barrier or slam up against it, or flip the car even, anything can happen.

why take that risk?

and bozodos i go to all the meets at mildura so i know whats going on, and i am the mildura drag clubs photographer aswell.

and by putting the cage in now, it sets the car up for the future too, especially when im gonna have to eventually put in a 6 point cage....but starting off with a 4 point for now.

so dont lol at me please.

You could say the same thing about a good percentage of the cars that go there, cage free, i find it funny. That said, crashes are the most entertaining thing about drag racing :rofl:

TBQH drag racing here bores the shit out of me, its nearly always just big block monaros, big block fords, vn shitboxes, R33 posers etc. Crappy facilities (no shade or anything), a corrugated dirt road out there, and a lack of any decent cars due to it only being a 1/8th.

well i know there are plans to hopefully get the whole dirt track bit laid with bitumen

and there are some quality cars out there, but i guess cause ive been out there so much i know what the better ones out there are lol

and crashes arent good when you know the person driving tho, trust me :P

there are lot of things planned for the strip all which will make it better :D

It might be more viable if they do it up with bitumen road, and get these abovementioned improvements to the track itself. I haven't been for ages, but the last "street" meet I was at was just Monaros, Capris, Cortinas, Kingswoods, etc.

The Operation Drag Right used to be a big hit with the bogans though, used to have them on friday nights, ironically before 'hoon laws' came in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...