Jump to content
SAU Community

Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

If Nissan can make the car with around 250-300HP and make it under $25k then it will succeed. Otherwise no one will buy it even with the current following of the S-chassis.

Under 25k, another yank on crack, when has an S15 ever sold for under 25k, did they even sell them in the states, oh thats right, you dont get a real silvia, you get the shitty 240sx, seems that the sr20 was not good enough for nissan usa so they had to f**k it with there own shit box engine, thats not unusual tho, everything shit in the 350z is due to nissan america thinking they can design a japanese sports car better than the japanese, maybe if they had used the sr20 from the start in the states the silvia would have a bigger following and would be able to sell for over 25k.

Under 25k, another yank on crack, when has an S15 ever sold for under 25k

If he's talking about USD$25K in his own market, that's not unreasonable. A top-of-the-line 350Z went for around $33K over there.

If Nissan could get a new Silvia to sell in Australia for under AUD$50K, it would do pretty well I reckon. Being $10-15K cheaper than a 370Z should give it a nice clean market separation.

There's not much out there in the affordable coupe market right now, and as much as I like hot hatches I don't see them as a viable replacement for a sports coupe.

With Toyota/Subaru releasing the FT86, and Honda working on a CRX replacement, hopefully things pick up in the lower end of the sports car market.

Under 25k, another yank on crack, when has an S15 ever sold for under 25k, did they even sell them in the states, oh thats right, you dont get a real silvia, you get the shitty 240sx, seems that the sr20 was not good enough for nissan usa so they had to f**k it with there own shit box engine, thats not unusual tho, everything shit in the 350z is due to nissan america thinking they can design a japanese sports car better than the japanese, maybe if they had used the sr20 from the start in the states the silvia would have a bigger following and would be able to sell for over 25k.

Yes...I was referring to 25K USD. Putting the car at a lower price than the 350z/370z. As for us never getting the Sr20, you act like its my fault. Yes I own a "240sx"....but I transplanted an SR so the difference between it and a 180sx or silvia are now virtually nothing.

As for the following here in the states...I would say it is one of the most popular tuner cars in the US right now and has been for the past 10 years.

Really I wish I had access to the cars you do but all I can do is work with what I have and at the moment try to work with an R32 for which I have NO replacement parts.

Edited by R32USA

oh no don't tell me they are going back to a ca18 lol.

I have to agree with everyone else in this thread aswell that the FT86 looks like an awsome car and will be very popular when/if they come out

25K is completely reasonable, just look what you get for under $25K USD now!

Just look at what you get for under 25K on the R-spec, i don't care what people say about Hyundai i think they got their sh#t together and make a decent product. Just ask Toyota, Hyundai is the only manufacturer they are threatened by.

And even if it is made in Korea it will still be more reliable than my 20yo skyline.

Mind you they do sell the base model direct injection V6 camaro in the states for $23K which still drives better than a 2nd hand 350Z for around the same money.

The R-Spec will be available in Karussell White, Bathurst Black and Tsukuba Red.

Read more: http://wot.motortrend.com/6446488/auto-sho...l#ixzz0cLMt8msm

Looks like they're trying to get the aussie market interested.

25K is completely reasonable, just look what you get for under $25K USD now!

Just look at what you get for under 25K on the R-spec, i don't care what people say about Hyundai i think they got their sh#t together and make a decent product. Just ask Toyota, Hyundai is the only manufacturer they are threatened by.

And even if it is made in Korea it will still be more reliable than my 20yo skyline.

Mind you they do sell the base model direct injection V6 camaro in the states for $23K which still drives better than a 2nd hand 350Z for around the same money.

which is actually a commodore with a different body on it

which is actually a commodore with a different body on it

Thats what i originally thought but actually other than the engine not that much is interchangeable with a commodore, all the tooling for all the parts in the camaro were built on the other side of the world, none of it is shipped from here (minus the DI V6 engine i think which only started being put into the commodore at the last update).

All the floorpan and suspension are unique to camaro, even the auxiliaries are not a straight swap.

if it is the new camaro, they are based off the commodore platform. the suspension, etc is the same (although it may not be interchangable it is based off the same platform) however they have a different wheelbase, etc. basically you could liken it to being nearly as close to a commodore as the monaro was.

Looks like they're trying to get the aussie market interested.

I didn't even notice that they named the black colour choice of the car 'Bathurst', shame those south koreans drive on the wrong side of the road.

I don't like the idea of a flat 4 at all. Otherwise, great concept. The more fun cars the better!
it's a shame the new 86 is going to be a flat 4.

Did you listen to what he said, he didnt say that the toyota was going to get the boxer engine he said that there unsure weather it was a subaru or toyota test car with the same code FT86, but as it did not sound like a boxer engine there assuming its the toyota.

Why would subaru and toyota be sharing engines?

Did you listen to what he said, he didnt say that the toyota was going to get the boxer engine he said that there unsure weather it was a subaru or toyota test car with the same code FT86, but as it did not sound like a boxer engine there assuming its the toyota.

Why would subaru and toyota be sharing engines?

Quick google search:

"The car is said to be equipped with a Subaru-sourced 2.0-liter four-cylinder boxer engine"

http://www.caranddriver.com/news/spied/08q...rts_coupe-spied

http://www.themotorreport.com.au/22486/201...berty-platform/

Still, until its released we wont know for sure, but in any case it is confirmed the Subaru and Toyota are jointly working together on this one and that it will in fact be a subaru engine.

First time I read it I thought, why, why, why would toyota (who have a name for reliability) go to subaru for an engine. nothing wrong with subaru engines btw, just that I'd rank toyota above them. Just seems odd.

Quick google search:

"The car is said to be equipped with a Subaru-sourced 2.0-liter four-cylinder boxer engine"

http://www.caranddriver.com/news/spied/08q...rts_coupe-spied

http://www.themotorreport.com.au/22486/201...berty-platform/

Still, until its released we wont know for sure, but in any case it is confirmed the Subaru and Toyota are jointly working together on this one and that it will in fact be a subaru engine.

First time I read it I thought, why, why, why would toyota (who have a name for reliability) go to subaru for an engine. nothing wrong with subaru engines btw, just that I'd rank toyota above them. Just seems odd.

I stand corrected, very odd combination, could understand holden doing something like that but toyota make good engines, atleast its almost gaurenteed to have a turbo engine tho.

the new subaru engines are pretty reliable, as are most other japanese engines these days. as for the partnership, i don't see it as that odd. certainly been more odd ones in the past.

as for the engine, i can't think of any rwd toyota vehicles using a 4 cylinder design that are current other than commercial vehicles (utes and vans). same goes for nissan (they do a 6 but not a 4). but the subaru engines are the right setup all they have to do is lose the transfer box and its a rwd. and it is a good way for subaru to possibly get into the rwd sportscar game, provided they don't make their car an awd version.

atleast its almost gaurenteed to have a turbo engine tho.

They've already stated that they're aiming for 147kW (200ps) NA. The original AE86 made a big deal about being NA and quick, if they're trying to build a spiritual successor I don't think that'll change.

I wouldn't hold my breath for a turbo one.

As for why its rocking the boxer 4, I suspect it's because this might have started as a Subaru project. When I first heard about this car it was a Subaru concept first, and then we later found out its a Toyota/Subaru partnership.

With a boxer 4 having such a different shape / layout to an I4, it wouldn't be easy to engineer a platform that can package both engine types and keep the same overall balance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...