Jump to content
SAU Community

Recommended Posts

Hello all

I have just taken ownership of a 1999 stagea 260rs and it's great I love it.

I should have brought myself this present a long time ago hahaha.

I do have a few question if some would please help me out

1. Do the middle round lights at the front of the series 2 only come on as high beams ??

2. The fluid bottle in the rear right hand side boot ??? :)

3. sometimes when I drive it a HICAS light comes on I know its for the 4ws but where do I fill it, is it this bottle in the boot ??and what do I fill it with ??

4. where do you guys in Queensland service your Stagea's

5. Are heavy clutches harder to drive slowly my car seems to shake alot when I reverse or try to take off slowly is this normal??

It would be a great help if you guys could help me out on these things

Will there be a cruise in QLD sometime soon ??

Thanks

Mike

Look into a Jim Berry clutch, he can make something to suit your needs. There are many threads on him.

Bottle in the rear is ATTESSA fluid, check the level with the car idling, should be between min and max. there are threads on the best fluids etc

Just use a quality (synthetic) atf for the atttesa and the power steering.

Its possible you need to become accustomed to driving slowly without slipping the clutch (i.e. in or out) or its possible there's a fault - maybe find a local member to try it for you.

Congratulations on getting a 260 - you have a head start on us mere RS4T owners!

Thanks guys for the help

I had the neighbour have drive and he said its a heavy clutch and it could also so be a button.

I have never had a button clutch I just have to ride the clutch more he said

When the next QLD cruize Guys ??

Edited by e-clip
It sounds like a button clutch of some sort.

That was my first thought also.

If its anything like mine, if you ride it at all (particulary noticeable in reverse) it will shudder and feel all round nasty.

Also if its a button clutch it will wear out quickly by riding it. Unless it is a mechanical fault, just play around until you find the sweet spot or if it really bothers you, put a new clutch higher on the priority list. (At least then you will know what you have).

Is the car standard? Have any pics?

Luke

I agree with Luke, riding a button clutch is worse for it. I bought my car with one installed by the previous owner, and the key is to ride it LESS. Give it a little bit more revs on take off, and ease it out a bit more quickly. If you get it right and get used to it, it shouldn't stall - there's enough torque in an RB25 or RB26 to get the car moving along without the engine dying.

I rode mine a few weeks ago trying to get a quick take off on a steep hill, and it shook the car so badly the CD jumped...

my new little r32 4dr RB26dett has a button clutch. I got used to it after the original take off when driving away, and no issue since.

my mate, however, rode it all the way on his drive around our local test circuit, muttering "shit", "sorry", "ah damn", etc every shudder he induced.

Hey mate yeah they are nice car's.

I do have a few question if some would please help me out

1. Do the middle round lights at the front of the series 2 only come on as high beams ?? Yep

2. The fluid bottle in the rear right hand side boot ??? :DAttessa fluid, can use PWR steer fluid

3. sometimes when I drive it a HICAS light comes on I know its for the 4ws but where do I fill it, is it this bottle in the boot ??and what do I fill it with ?? Its electronic, nothing to fill, may be damaged, mine had the plug smashed over when transported, just install a cancellor bar.

4. where do you guys in Queensland service your Stagea's mine was orriginally done at Gavin wood autotech on the goldcoast

5. Are heavy clutches harder to drive slowly my car seems to shake alot when I reverse or try to take off slowly is this normal?? Mine has a button and is a dog of a thing in the carpark, as mentioned a few more rev's and just drop it, slipping will make it shuidder and wear out quickly.

Yeah I had similar problems with mine. It came from Japan with some HKS triple plate clutch that was a pain in the a*s to drive.

Did some searching and ending up getting a single plate Nismo coppermix or something. AWESOME clutch!

My 260RS is now around 270kW and it handles the power easy. But best is city driving, I can sit in second and come to almost a standstill, and it don't stall.

Real easy on the foot too.

+1 for the Nismo Coppermix clutch.

Hey thanks for everyone's help

I'am starting to get the hang of the clutch. Its a bloody nice car

The last owner had it on the dyno, 330hp at the wheels but its heavy on the fuel but you can't have everything

I upload some pics tomorrow

Edited by e-clip

330hp? No wonder you said it was fast! ...that's over 50% more power than James got in his new RS260 (a few posts down). Let us know what mods you have (that you can tell) when you post up the pics.

This is my baby

http://www.skylinesaustralia.com/forums/St...hl=autech+260rs

Silly me if I just read the post I would have seen it has a Excedy single plate clutch

Edited by e-clip

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...