Jump to content
SAU Community

Recommended Posts

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

about a month or 2 ago between Chermside and Aspley, I spotted a small metal box sitting in the centre traffic island.

It was fixed to the ground (approx 50 x 50cm x ??) and seem to have some type of camera & flash mounted in it.

also looked like it was attached to those rubber traffic counter strips running across the road.

anyone else seen what I'm talking about?

hope like hell they aren't a new type of speed camera. they could hide them almost anywhere.

about a month or 2 ago between Chermside and Aspley, I spotted a small metal box sitting in the centre traffic island.

It was fixed to the ground (approx 50 x 50cm x ??) and seem to have some type of camera & flash mounted in it.

also looked like it was attached to those rubber traffic counter strips running across the road.

anyone else seen what I'm talking about?

hope like hell they aren't a new type of speed camera. they could hide them almost anywhere.

They are indeed the new speed cameras.

No their not...

They had them on all major arterial roads out of Brisbane.

Their simply traffic monitoring cameras, it was in the local "North side chronicle" paper a few months back.

They were set up on sandgate road, gympie road & old northern road.

Also a bunch of back streets to monitor how many people used urban streets to take short cuts.

They were only up for 3-4 days and were very basiclly secured to sign posts.

The one on Linkfield road near bunnings Carseldine was stolen hence the story in the paper calling for it to be returned.

The new fixed speed cameras look very similar to the old ones, just a tad bit smaller. Check out the one on the gateway just before the Nudgee turnoff heading southbound. Its about to go active in the next week. Just need the lines on the road to be painted and its up and running. Just another one to add to the dozens of mobile units out there to take your money...

Im still surprised no one had gone out with a petrol powered grinder and just cut a speed camera down...

Or thrown paint all over the road where the lines are...

Or spray painted the lens...

Or gone postal... :D

I don't know about here in Australia but in the UK they've given them a hard time:

http://www.speedcam.co.uk/gatso2.htm

Im still surprised no one had gone out with a petrol powered grinder and just cut a speed camera down...

Or thrown paint all over the road where the lines are...

Or spray painted the lens...

Or gone postal... :(

XF vs Speed camera?

I bet the XF would win...

I don't know about here in Australia but in the UK they've given them a hard time:

http://www.speedcam.co.uk/gatso2.htm

Thats awesome... :cool:

So many photos...

XF vs Speed camera?

I bet the XF would win...

I was thinking the same thing... :(

No their not...

They had them on all major arterial roads out of Brisbane.

Their simply traffic monitoring cameras, it was in the local "North side chronicle" paper a few months back.

They were set up on sandgate road, gympie road & old northern road.

Also a bunch of back streets to monitor how many people used urban streets to take short cuts.

They were only up for 3-4 days and were very basiclly secured to sign posts.

The one on Linkfield road near bunnings Carseldine was stolen hence the story in the paper calling for it to be returned.

The new fixed speed cameras look very similar to the old ones, just a tad bit smaller. Check out the one on the gateway just before the Nudgee turnoff heading southbound. Its about to go active in the next week. Just need the lines on the road to be painted and its up and running. Just another one to add to the dozens of mobile units out there to take your money...

i'm pretty sure the speed camera locations for my GPS that i downloaded the other day had that one in it already

yeah the locations are well known, they published the list in the sunday mail about 3 weeks ago...

all the locations to be activated in 2010...

im blown away people still get caught by them, I mean their in the same spot every day... slow down...

i'm pretty sure the speed camera locations for my GPS that i downloaded the other day had that one in it already

where can you download all the camera sites in to a gps, what is the best gps to have these days, i get my license back in 4 weeks and will be needing

to know where these camera's are. it's been a long 3 years so i have no idea where any are now.

Edited by boostn32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...