Jump to content
SAU Community

Recommended Posts

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

about a month or 2 ago between Chermside and Aspley, I spotted a small metal box sitting in the centre traffic island.

It was fixed to the ground (approx 50 x 50cm x ??) and seem to have some type of camera & flash mounted in it.

also looked like it was attached to those rubber traffic counter strips running across the road.

anyone else seen what I'm talking about?

hope like hell they aren't a new type of speed camera. they could hide them almost anywhere.

about a month or 2 ago between Chermside and Aspley, I spotted a small metal box sitting in the centre traffic island.

It was fixed to the ground (approx 50 x 50cm x ??) and seem to have some type of camera & flash mounted in it.

also looked like it was attached to those rubber traffic counter strips running across the road.

anyone else seen what I'm talking about?

hope like hell they aren't a new type of speed camera. they could hide them almost anywhere.

They are indeed the new speed cameras.

No their not...

They had them on all major arterial roads out of Brisbane.

Their simply traffic monitoring cameras, it was in the local "North side chronicle" paper a few months back.

They were set up on sandgate road, gympie road & old northern road.

Also a bunch of back streets to monitor how many people used urban streets to take short cuts.

They were only up for 3-4 days and were very basiclly secured to sign posts.

The one on Linkfield road near bunnings Carseldine was stolen hence the story in the paper calling for it to be returned.

The new fixed speed cameras look very similar to the old ones, just a tad bit smaller. Check out the one on the gateway just before the Nudgee turnoff heading southbound. Its about to go active in the next week. Just need the lines on the road to be painted and its up and running. Just another one to add to the dozens of mobile units out there to take your money...

Im still surprised no one had gone out with a petrol powered grinder and just cut a speed camera down...

Or thrown paint all over the road where the lines are...

Or spray painted the lens...

Or gone postal... :D

I don't know about here in Australia but in the UK they've given them a hard time:

http://www.speedcam.co.uk/gatso2.htm

Im still surprised no one had gone out with a petrol powered grinder and just cut a speed camera down...

Or thrown paint all over the road where the lines are...

Or spray painted the lens...

Or gone postal... :(

XF vs Speed camera?

I bet the XF would win...

I don't know about here in Australia but in the UK they've given them a hard time:

http://www.speedcam.co.uk/gatso2.htm

Thats awesome... :cool:

So many photos...

XF vs Speed camera?

I bet the XF would win...

I was thinking the same thing... :(

No their not...

They had them on all major arterial roads out of Brisbane.

Their simply traffic monitoring cameras, it was in the local "North side chronicle" paper a few months back.

They were set up on sandgate road, gympie road & old northern road.

Also a bunch of back streets to monitor how many people used urban streets to take short cuts.

They were only up for 3-4 days and were very basiclly secured to sign posts.

The one on Linkfield road near bunnings Carseldine was stolen hence the story in the paper calling for it to be returned.

The new fixed speed cameras look very similar to the old ones, just a tad bit smaller. Check out the one on the gateway just before the Nudgee turnoff heading southbound. Its about to go active in the next week. Just need the lines on the road to be painted and its up and running. Just another one to add to the dozens of mobile units out there to take your money...

i'm pretty sure the speed camera locations for my GPS that i downloaded the other day had that one in it already

yeah the locations are well known, they published the list in the sunday mail about 3 weeks ago...

all the locations to be activated in 2010...

im blown away people still get caught by them, I mean their in the same spot every day... slow down...

i'm pretty sure the speed camera locations for my GPS that i downloaded the other day had that one in it already

where can you download all the camera sites in to a gps, what is the best gps to have these days, i get my license back in 4 weeks and will be needing

to know where these camera's are. it's been a long 3 years so i have no idea where any are now.

Edited by boostn32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...