Jump to content
SAU Community

Recommended Posts

Hey guys,

Had a tyre blow out the other night....don't know why as it still has heaps of tread left is driven nicely. Anyways I'm thinking of buying a package with rims, but not sure where the best places in Melbourne are for this. I'm from Sydney and there's quite a few there but haven't seen all that many here. Where do you all recommend?

Also, does anyone have a tool to remove locknuts? Only just discovered the locknuts when I wanted change the tyre. The last wheel shop that i bought them off never gave me the unlock tool

thanks

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

since you mention "mags" i assume your after some basic wheels hit up bob jane or the tyre factory,

if you want some decent wheels go to importmonster.com.au or j-imports.com.au might cost you a bit more but your car will be thousand times better looking.

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/#findComment-5015625
Share on other sites

Thanks. I mean rims - something like Lenso's etc. As much as I'd love some jap rims, don't really have 4k to spend on them. I don't think Bob Jane or anywhere like that would have what i'm after. In Sydney they have Tempe Tyres & Australias Best - like those places is why I'm after. Will check out the sites you mentioned.

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/#findComment-5015637
Share on other sites

Yeah TTF is a decent place.. Have bought 2 sets from there.. Big range (depends which branch I suppose) dandenong branch has a few choices.. And as for price , if u go to the dandenong one and tell them ure paying cash, they're pretty good with prices. Bought a set of 18" with Tyres, Price asked was $2200 and ended up getnvthem for $1650 . So yea.. Happy shopping!

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/#findComment-5015639
Share on other sites

Thanks. I mean rims - something like Lenso's etc. As much as I'd love some jap rims, don't really have 4k to spend on them. I don't think Bob Jane or anywhere like that would have what i'm after. In Sydney they have Tempe Tyres & Australias Best - like those places is why I'm after. Will check out the sites you mentioned.

you dont need 4k talk to aaron @ importmonster he is on these forums i got my wheels with tyres from him 2-2.5k will get you a good set of wheels with rubber in good condition for sure. less if u hunt around and are lucky.

tyrepower are also good for the wheels like tempe etc.

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/#findComment-5015698
Share on other sites

Tyrepower Hawthorn are dealers for most jap rims, are had most new in stock or on the way. 17x9+22 RE30, CE28N, TE37 was 2900-3100 NEW.

also have many other brands if that is higher than what you want to pay, service is great there. great range of tyres and wheels at great prices on anything.

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/#findComment-5015858
Share on other sites

I just recently bought some wheels. Best prices you'll find in Melbourne I reckon are at Advance Tyres

http://www.advancetyres.com.au/ - these guys are seriously cheap and will give you an ace price up front

I ended up buying from Donnellans in Box Hill for the same price after I told them the price I got at Advance but only reason I got them there is becuase they were closer. The both have a great range and Jap stuff like RAYS too.

http://www.donnellans.com.au/pages/7_locations.php

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/#findComment-5015891
Share on other sites

Tyrepower Hawthorn are dealers for most jap rims, are had most new in stock or on the way. 17x9+22 RE30, CE28N, TE37 was 2900-3100 NEW.

also have many other brands if that is higher than what you want to pay, service is great there. great range of tyres and wheels at great prices on anything.

yeh only hawthorn tyrepower get jap rims cos of the owner there as far as i know, but in general good place to go..

thats a decent price for te37s

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/#findComment-5015910
Share on other sites

www.jessestreeter.com

Speak to Jesse, he can source any Jap rims from any manufacturer, as he lives over there, for better prices than anywhere I have seen.

Plus, if you find something on Yahoo Auctions, he can bid on them for you too.

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/#findComment-5016056
Share on other sites

if you go to TTF in Dandenong do not let them put the wheels on your car. buy it and get it balanced and all butt hats it. last 5 cars iv sent in there we got the car back with cross threaded studs, damage to front bar of car, damage by rolling wheels across the workshop which went of track into one of our cars, dropped a torque wrench on the bonnet, grease mark in the interior. most of it was fixed by them but after a lot of unneeded hassales

and i can keep going on and on and on. they have a good range of wheels you can get for cheap but customer service is shit and they do not care about customer cars unless your spending a stupid amount there.

if you do go there and get them to do the work at least stay back and watch them working on your car making sure they don’t f**k up the simplest things

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/#findComment-5016677
Share on other sites

you dont need 4k talk to aaron @ importmonster he is on these forums i got my wheels with tyres from him 2-2.5k will get you a good set of wheels with rubber in good condition for sure. less if u hunt around and are lucky.

Exactly :D

Aaron @ Import Monster (www.importmonster.com.au). SAU forum sponsor, also a memember of the SAU-Vic club.

Always good pricing and service - and you actually deal with a face, not a computer if that's how you like to operate :)

They also have a retail shop front in Bayswater. So you can see and touch the wheels before you buy.

Hell, you can even tell him you want to put several wheels next to the car to have a look - he loves doing that - i go there and do it quite a bit ;)

Obviously he is not going to be as cheap as some person in Japan that has no tax to pay, no laws to abide by - but at the same time if you get fked over - you don't have a leg to stand on.

So i've always been happy with ole Aaron & his service. I do have issues with his wheel choice on his own GTR - but that is another issue...

You are only going to be spending big $$ when you source rare wheels and/or new ones.

2nd hand ones generally are pretty cheap - it then comes down to how much coin you are spending on tyres.

My tyres alone (17") were around the $1200 mark - almost as much as the rims if i recall correctly :D

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/#findComment-5016858
Share on other sites

Obviously he is not going to be as cheap as some person in Japan that has no tax to pay, no laws to abide by - but at the same time if you get fked over - you don't have a leg to stand on.

I'm guessing this is referring to Jesse?

If so, he actually sent my rims before I had even made a full payment, same with dezz and countless other people I know.

IIRC, he actually supplies to a few of the NS sponsors, among others.

Link to comment
https://www.sau.com.au/forums/topic/302428-mag-wheels/#findComment-5017326
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...