Jump to content
SAU Community

Recommended Posts

1.10 is very quick in a gts-t, particularly a pretty standard one - I dont think this is a good indication of what most people achieve :D

As a general guide - assuming you have around 180rwkw like most mildly modded GTS-Ts you should be able to do between 1.15-1.17 on street tyres.

  • 2 weeks later...
  • 4 months later...

1.11 on semis and 260ish killer wasps, That was my best for the day, I am not the most experienced driver but hope to be in the 1.10 next time out, also track temp was 4 deg at 9.00, give me some more time and Ill think of some more excuses

:thumbsup:

  • 7 months later...

those are some amazing times, my bog standard boat has only managed a best of 1.16.00, im stoked if i will be able to drop that to low 114s next time but now i hear even that would be half arsed? kerr-ist.

chucked a tein SS suspension in and a front mount but otherwise stock 96' model, been out there a few times, probably 5 or 6 in the 33 and last two were very wet.

1.10 is very quick and ive never seen an r33 achieve it while i was there unless in GTR guise..you sir are a driving god.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...