Jump to content
SAU Community

Uas Major Service For Rb25det

Kujotk

By Kujotk,
in New South Wales

 Share

Recommended Posts

Kujotk Grand Master

Kujotk

Posted
Posted

Someone must have taken the UAS Major service package up, and was the extra $700 thing worth it?

www.uniqueautosprts.com then click "service centre" then "major service".

Has a whole list of things, engine (elf semmi synthetic), check sensors and fault codes, injection cleaner, iridium sparks, compression test, water pump, timing belt, diff, transmission oils ect.... anyway the list is on their.

also is the N1 waterpump worth the extra $$$$, well i'm assuming it will cost extra

Link to comment
https://www.sau.com.au/forums/topic/303687-uas-major-service-for-rb25det/
Share on other sites
Cassbo Grand Master

Cassbo

Posted
Posted
Someone must have taken the UAS Major service package up, and was the extra $700 thing worth it?

www.uniqueautosports.com then click "service centre" then "major service".

Has a whole list of things, engine (elf semmi synthetic), check sensors and fault codes, injection cleaner, iridium sparks, compression test, water pump, timing belt, diff, transmission oils ect.... anyway the list is on their.

also is the N1 waterpump worth the extra $$$$, well i'm assuming it will cost extra

To me the initial package doesn't seem too unreasonable, I don't think I would spend the extra $700 though... that's all stuff I'm pretty confident doing myself :rolleyes:

From what I read the N1 water pump has larger but less blade inside it to prevent cavitation at high RPM. The trade off is worse flow at low RPM. If you spend most of your time on the track or driving at a moderate speed it should be OK. If you are in bumper to bumper traffic everyday... I wouldn't recommend it unless you have some masochistic urge to cook your engine :thumbsup:

Duncan Grand Master

Duncan

Posted
Posted

I'd give the n1 pump a miss (costs more and not really right for a road car). But Ben (head mechanic at UAS) is excellent and very careful and thorough in his work. He built the last race engine in my car and it is going strong

Cassbo Grand Master

Cassbo

Posted
Posted
"UAS Professional in-house guard rolling now available for $75.00 per guard."

it was on their website, what does that mean?

When you get wheels that are 11ty" wide and have an offset of -11ty, the tyres will tend to scrub on body work. This can be fixed by rolling your guards.

Rolling guards can be done either professionally to get a good result, or with a breaker bar on your driveway for the ghetto look :D

11ty

Kujotk Grand Master

Kujotk

Posted
  • Author
Posted

well i seem to be getting alot of PM's of NEGATIVE feed back instead of positive feed back about UAS, everything from refusing to fix an oil leak that was aparrently due to not doing a sump bolt up properly to cracking a head gasket that was induced by a tune with Safc2 and the timing wasn't adjusted acordingly... That coupled with my own bad experience with them a while back...

Who else has done a decent 100k log book service and timing belt change, and who was it with? I keep hearing good things about Yavus's team, anyone had it done their?

And yes its just a service, but i want everything done properly on it seeing as the car hasn't been looked after as much as it should have, and that 100k is a pretty important service that can make or break the car.

And i don't mind paying alittle more for a perfect job

HOT_R33 Proficient

HOT_R33

Posted
Posted

Peter Hopkins at ADVAN Performance does a great job. He uses nothing but the best parts and has been tuning skylines for years now, both here and in NZ.

He charges a little bit more than most but after taking my skylines to other places that are cheap and almost destroyed them...

ei: Mercury Motorsport in Queensland thought it would be a great idea to put low impedence injectors in my R33 GTST and then dyno it for 6 hours. (Any of you who know anything about injectors and RB's, will already be shaking your heads).

Nearly fried the comp and the car ran like sh*t until I took it to Peter at ADVAN, he replaced the injectors and tuned the car beautifully.

Highly recommended!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...