Jump to content
SAU Community

Recommended Posts

Car is still up forsale peeps.

never really updated the old sale thread but here we are with a new one.

R32Gtst

Late 1993

180.xxxKs

Manual

All power options inc. sunroof

serviced every 5000ks

Rego till June i believe

turbo

$8500 FIRM

Mods:

3A Racing Air filter

JJR Split dump pipe

HPI front pipe

standard cat + test pipe

Kakimoto regu 06&R cat back

Splitfire coilpacks

ISC N1 coilovers

Cusco castor rods

Kazama tie rod ends

JJR front camber arms

Hicas lock bar installed + all lines removed (15-20kg all up)

Cusco 3 way rear strut brace

Nissan standard front strut brace

Road & Race 4wheel aligment

Exedy Heavy duty clutch

Nismo reinforced clutch pedal bracket

DOT 4 fluid flushed throughout all the lines

Nismo Radiator cap

Nismo Oil cap

Excedy small battery

Full coolant flush throughout the cooling system

Dba cross drilled and slotted rotors FRONT

Dba vented rotors REAR

Bendix ultimate pads all round

Break fluid flushed with DOT4 fluid through every corner

Gramlights 57D 17x9 +22 offset all round in matte white finish

Falken Azenis RT615 225/45R17 at FRONT

Yokohama A.Drive R1 235/45R17 at REAR

Car is all primed except for front bar, mirrors and door handles!

just needs sanding and color and it will look schmick :P

SNC00265.jpg

SNC00128.jpg

Edited by Outblast_32
Link to comment
https://www.sau.com.au/forums/topic/304686-r32-gtst-incomplete-project/
Share on other sites

LAST AND FINAL PRICE DROP $8200

For low ballers i will drop it to $7500 but keep in mind the gramlights will be swapped over with wat ever other wheels i can find! and dont complain cause your low balling! and if you do complain i would like to be given the chance to slap you in the face

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...