Jump to content
SAU Community

Recommended Posts

Hey peeps the other day i had a full 2.5" exhaust with a 4" cannon fitted to my na 34 anyhoos when driving at about 2000 rpm this fdup vibrating noise comes in and doesnt go till about 3000 is this normal as it rapes my ears cronically but it only seems to be on the inside of the car and it sounds normal outside also it sucks driving up hills coz i cant even hear my music or people in the car speak and it sounds madd as once u get past the noise any help or intuuition would be appreciated cheers jarrod.

Link to comment
https://www.sau.com.au/forums/topic/304891-new-exhaust/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

if it was the gearbox it should've done it before the exhaust got fitted.

could possibly be that the exhaust is hitting the body though. might be worth getting under the car to see if it is sitting close to anything. or maybe have someone stand on the side of the road and go past them with it making the noise and they should be able to tell if it is exhaust noise or a rubbing noise

Link to comment
https://www.sau.com.au/forums/topic/304891-new-exhaust/#findComment-5047405
Share on other sites

sounds like the typical rb NA drone that becomes very obvious with an aftermarket exhaust, mine will do it still, and ive got a 2.5 inch exhaust with a mid system 2in1 muffler/resonator plus a second resonator and a twin tip muffler

good news is that its easy cured by changing ur driving style, just drive in a gear lower then you normally would and let it rev up a bit (the idea being to keep it above that drony 2 or 2.5 - 3000 range) then get into 5th gear when your done accelerating - unless your in auto? then you might be stuck with it

Link to comment
https://www.sau.com.au/forums/topic/304891-new-exhaust/#findComment-5047489
Share on other sites

theres a good write up somewhere on here about rb motors having a "raspy" metalic vibration or rattle sounding exhahust note at a certain rpm range but there nothing actually wrong, mine sounds a bit like this sometimes

Link to comment
https://www.sau.com.au/forums/topic/304891-new-exhaust/#findComment-5054987
Share on other sites

I had that tinny crap sound ended up being that my stock nissan catalytic converter was stuffed and broken apart ... (catless and hollowed out cat's are bad for this resonance noise around the 3500- 3700 rpm area aswell )

So to fix that issue

My new exhaust system consists of the following on my R32 N/A RB20DE

Coby 6 into 2 into 1 with 2.5" outlet extractors

3" Catco Highflow catalytic converter

2.5" catback exhaust with single muffler and a canon muffler @ the rear ...

I had that issue really bad before I replaced my cat and found it to be blocked and a week later it broke apart into big chunks and allmost completely blocked up the exhaust flow ... so I pulled it all off and now fixed it all up and sounds really deep and has that good skyline note about it ...

Link to comment
https://www.sau.com.au/forums/topic/304891-new-exhaust/#findComment-5055228
Share on other sites

twin cams make this rattle when you put a canon on it, the stock exhaust has a valve that opens and closes to stop this noise. Now you took it off and have a cannon it amplifies the rattle.

Link to comment
https://www.sau.com.au/forums/topic/304891-new-exhaust/#findComment-5062113
Share on other sites

  • 4 weeks later...

I just got a 2.5" rear muffler and 3" tip. The sound is good, but the sound produced rapes my ears in my car too. It sounds fine outside though... I think it's because of the stock Nissan Catalytic Converter...

Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/304891-new-exhaust/#findComment-5118977
Share on other sites

Hi wht510,

It was just installed today... I think you're right about the rubber mounts... I think it could be the exhaust leaning into the bottom of the car causing the windows and the whole car to vibrate at certain RPM's.

Before I got this installed, I specifically asked for a nice tone but not enough to get defected. Also not vibrate the car. He suggested that a 2.5" rear muffler would do, and any sort of tip would be fine.

I will take it to another exhaust place to get it checked out tomorrow, Blitz Custom Exhaust (place I got it done) is closed tomorrow :D

Link to comment
https://www.sau.com.au/forums/topic/304891-new-exhaust/#findComment-5119082
Share on other sites

I just went to Werribee Exhaust (99 Railway Ave, Werribee, VIC) and they have fixed the problem. The exhaust tip was too close to the bottom body vibrating the whole chassis. They let it down a few centimeters and it's all fixed now. The total cost to fix was $10.00. Muffler sounds nice in the car (windows up/down) and there's no more vibrations.

I hope this helps others with the same problem, especially to the OP.

Link to comment
https://www.sau.com.au/forums/topic/304891-new-exhaust/#findComment-5119479
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...