Jump to content
SAU Community

Recommended Posts

man I feel dumber already

guess I might as well trash my '50k' stagea seeing as its nothing compared to this beast of an r33

gt3076 was obviously the wrong way to go, stock turbo/ecu would have been fine for an 11.

then again, my track rb26dett might not cut 11 for the qrtmile, f**k Im doing it wrong

poster14790647.jpg

yup definately all wrong right here

  • Replies 211
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I missed all the action! :thumbsup:

I will rate your car anyway because I'm such a nice and honest person...

FAIL/10

The reason I did not use a number is simply because there is no number to describe this absolute failure.

Stock turbo = 250kw (LOL) Move this to wasteland!

I have a book about how to tune i read it and just add some thing else and still runin stock turbo :thumbsup: took all stuff out of my boot u can do an 11 sec pass with 200rwkw all really need is a good set up

Yeah I gotta weigh in my 2c here .... there are PLENTY of 300rwkw R33s that can't run an 11 on street tyres .... and I have NEVER heard of a stock turbo making 250rwkw - especially at 12psi. My R34 RB25NEO (FAR superior motor/head/valves/pistons) only made 230rwkw with an HKS GT25/30 turbo with a shit-ton of supporting mods (including SAFCII tuning).

My old S15 which had 200rwkw (and similar power to weight ratio to an R33 with 250rwkw) did a 12.74, and that was considered to be pretty quick.

Even if your car made 250rwkw (which with standard turbo is IMPOSSIBLE at 12psi), you would NEVER, EVER, EVER run an 11 second pass.

Sorry mate, but you are absolutely dreaming ....

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...