Jump to content
SAU Community

Recommended Posts

since when? plenty of people have low mounted gt35s

and to all the stock ecu haters, it was running 7psi ffs, would have been running just as rich as it does with a standard turbo at 12-13psi. wont lean out until you start going past the max flow of the injectors or fuel pump.

OP: install your pfc, z32 afm and evc and get it tuned. see how it goes, then decide if the turbo is suitable and if you need bigger injectors

Hmm i didn't think you could fit a GT35 low mounted. Post up pics so we can see what size turbo it is.

Its got some numbers on it so i took a photo of those if they are any help...its got a 4" intake too, i only got told by a workshop when i took it in that they thought it was a gt35...but im not sure

post-63150-1264838658.jpg

post-63150-1264838706.jpg

post-63150-1264838744.jpg

post-63150-1264838787.jpg

post-63150-1264838840.jpg

since when? plenty of people have low mounted gt35s

Fair enough, i thought the size of a GT35 would foul on something low mounted. Havn't ever looked in to low mounting a GT35, all that i have seen have been high mounted.

Edited by PM-R33

blitz used kkk housings with turbonetics wheels, that k27 you have is a large frame one and no doubt of a mecedes truck or some random tractor

it is most certainly not a blitz turbo, nor is it a performace turbo.

2 secs and ill look up what it is off

ok just had a look...with out the proper build tags i cant see exactly what it is but it would have come from a Liebherr or deutz earth mover.

its a shame the tags have been removed other wise i could have given you a part number for a smaller turbine housing.

are there any tags or numbers on the turbine housing, it looks like a 13.21 rear housing (big)

ok just had a look...with out the proper build tags i cant see exactly what it is but it would have come from a Liebherr or deutz earth mover.

its a shame the tags have been removed other wise i could have given you a part number for a smaller turbine housing.

are there any tags or numbers on the turbine housing, it looks like a 13.21 rear housing (big)

Nope i just had another look and the only numbers on the turbo are of the ones i took the photo of... so if your saying this isnt a performance turbo...because arent the k27 a performance turbo? so is it still a k27 or....?

Im kind of wondering if i can sell this and wanting to see how much i should be wanting for it

Why would you? It would run like crap, laggy as hell and the stock ECU wouldn't know what is going on so it would run rich and pull timing. Not to mention you run the risk if something goes wrong and boost spikes to a proper amount for it that it can run efficiently (18+psi) you risk maxing out the injectors, maxing out the fuel pump, hitting airflow cut etc. Not saying it's going to kill something instantly but all in all its just not a good combination.

Obviously you can run it like that if you choose, hell you could run a T51R on the stock setup on 4psi, but is it going to be well setup and safe, no it is not. I ran my plenum and turbo upgrade on the stock ECU and it ran ok, did it run nicely and make power, no it did not and it's a fairly small turbo compared to a GT35, which the OP's number aint, it looks to be much larger atleast housing wise.

Edited by PM-R33
Why would you? It would run like crap, laggy as hell and the stock ECU wouldn't know what is going on so it would run rich and pull timing. Not to mention you run the risk if something goes wrong and boost spikes to a proper amount for it that it can run efficiently (18+psi) you risk maxing out the injectors, maxing out the fuel pump, hitting airflow cut etc. Not saying it's going to kill something instantly but all in all its just not a good combination.

Obviously you can run it like that if you choose, hell you could run a T51R on the stock setup on 4psi, but is it going to be well setup and safe, no it is not. I ran my plenum and turbo upgrade on the stock ECU and it ran ok, did it run nicely and make power, no it did not and it's a fairly small turbo compared to a GT35, which the OP's number aint, it looks to be much larger atleast housing wise.

Kinda noob question here...

but i was wondering... would a decent tune with a decent ecu and uprated fuel pump, injectors etc make a gt35 less laggy or would it be un-noticeable? or not make a difference because of the size of it in the first place?

  • 9 months later...
Well....

I brought my r33 rb25det with this insanely big turbo already on the car....looks like a gt35 front but the exhaust housing of it is huge and when i would drive the car it would lag and in first gear kick in at about 6k revs, and 2nd like 5500, but when it kicked in it would sit me back in my seat on stock 7psi,

BUT i recently brought a new DSR 430 turbo, and then raised the boost up to 10psi, it spools up at about 3k and i get full boost by about 4-4500revs

But even though i raised the boost and its hitting boost for longer in the rev range....its actually going slower then the old turbo. The old big turbo i had i would be doing about 60 before changing into 2nd and about 100 at the end of 2nd, and it was on stock 7psi but with this dsr turbo i get to about 50kph in 1st and about 90 in 2nd gear... on 10psi

The DSR turbo keeps power through all the way to redline aswell,

So is this becuase the DSR430 turbo i brought a piece of chinese crap? or do i need a really decent tune? or a high quality turbo such as a garretgt30 or somthing?

Thanks guys!

hey bro i bought a dsr430 turbo and i had trouble installing it how did u install urs if u dnt mind me asking

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...