Jump to content
SAU Community

Recommended Posts

evo all the way, + aren't wrx's meant to have alot of gearbox problems??? i've heard of heaps of people that have had to replace their gearbox....

yeh like who do you know?

this is what everyone says. even before i went to subaru this is all i ever heard.

but after owning a couple and being active on the rex forums for a long time, i rarely hear of people blowing their boxes EVER. i have heard of some of the earlier classics pre 00 doing their boxes. but these cars were used for hill climbs and motor sport. the old rexies have had 10 years of hard launching from various young males. this is to be expected.

extreme launching on startup time and time again will make any gearbox blow. whether it be ferrari, or evo or wrx.

go on the evo forums and find out how their 10 year old gearboxes are going after so many years of launching abuse. they all share the same fate.

like i said its user abuse over many many years and many many launches. not actually a design or manufacturing fault.

Like what was said it should be STI vs Evo in your decision, the WRX is more on par with the Galant VR-4 IMO. And go an Evo 5, 6 or 6.5 TME, all awesome cars and unlike the Impreza did not come from the Subaru school of ugly as f*ck cars.

yeh like who do you know?

this is what everyone says. even before i went to subaru this is all i ever heard.

but after owning a couple and being active on the rex forums for a long time, i rarely hear of people blowing their boxes EVER. i have heard of some of the earlier classics pre 00 doing their boxes. but these cars were used for hill climbs and motor sport. the old rexies have had 10 years of hard launching from various young males. this is to be expected.

extreme launching on startup time and time again will make any gearbox blow. whether it be ferrari, or evo or wrx.

go on the evo forums and find out how their 10 year old gearboxes are going after so many years of launching abuse. they all share the same fate.

like i said its user abuse over many many years and many many launches. not actually a design or manufacturing fault.

i know a guy on his 3rd gearbox, but his is was the mid to late 90's version (the original shape) and he flogs the arse out of it.

also saying that the evo is more reliable than the wrx, well you would expect it to be as it costs a fair bit more, however other than the guy i know who goes through gearboxes, and another guy who blew the turbo while sitting flat to the floor along the highway seeing how fast it's top speed was, i haven't really heard that many more issues about it.

i know a guy on his 3rd gearbox, but his is was the mid to late 90's version (the original shape) and he flogs the arse out of it.

also saying that the evo is more reliable than the wrx, well you would expect it to be as it costs a fair bit more, however other than the guy i know who goes through gearboxes, and another guy who blew the turbo while sitting flat to the floor along the highway seeing how fast it's top speed was, i haven't really heard that many more issues about it.

exactly

its a bullshiit myth that WRXs have weak/shiit gearboxes that break all the time. all user input. would happen to any car under the same abuse.

Edited by DrewII

What does your mate want to do with the car (mod wise)?

The wrx/sti is a nicer car for a daily but the evo is a lot more fun. In terms of mods; the 4g63 is a stronger engine than the ej20/25 (the 25 even less so).

As for the gearbox comments, the 5 speed is the one with the short fuse but that's only when you start running loads of power (200kw atw, remember stock they're about 130kw atw) and abuse the thing. Show it mechanical sympathy and it's okay. The 6 speed from the STI is the strong subie box. For the Evo's the 5 spd is the stronger box.

I own a wrx and have driven an 05 sti and evo 9 back to back. I preferred the Evo; the only reason I bought the wrx instead of the evo was because of cost (as I wanted it new).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...