Jump to content
SAU Community

Recommended Posts

basing which fuel is better just on some random feeling you get about how your car go's after leaving the petrol station or a random issue that started soon after using a certain fuel is maybe not the best form of deciding which is best. im willing to bet its all the same sh*t. without proper testing you dont know kids.

this is how it works in WA, exchange the word BP for mobil and you'll have the south Australian version. note the petrol is ready to go into your car when it leaves mobil (in sa) in the fuel trucks (if you want to steal it fnf style) my mate managed all the fuel trucks in SA and they go's straight from mobil to the service stations out in the stix and locally for all BP MOBILS and SHELLS.

from http://www.fuelwatch.wa.gov.au/misc/dsp_fa...standing_Fu.cfm

I. Fuel quality & measurement

1) Do any retailers sell ‘dodgy’ fuel / How do I know if fuel is ‘dodgy’?

There is very little difference in the quality of fuel sold in WA, no matter where you buy your fuel. BP operates the only refinery in the State and supplies over 90% of the petrol sold in WA.

Also all fuel sold in WA is required to comply with State and Commonwealth quality standards. Occasionally, a small amount of petrol may be imported into WA, however the fuel must still meet with the fuel quality standards.

The main difference in the fuel comes from company marketed additives. If you have concerns about the fuel quality at a particular site, raise your concerns with the site manager in the first instance.

For more information about the fuel standards contact:

• For WA: Department of Environment and Conservation

• For Commonwealth: Department of the Environment, Water, Heritage and the Arts

--------------------------------------------------------------------------------------------------------------------------------------------------------------

if you got a crap supply of fuel who's fault is it? the store you bought it off or mobils refinery or the original crude oil. it could be just a 1 off random batch that had some contaminant in it.

now if you own a ferrari or something to that effect you may just wanna play it extra safe and always hit BP shell whatever floats ya boat. if you have a GTR maybe also play it a bit safer as i do only going to BP but if you own a very average turbo i just would avoid bilo brand petrol stations.

there are also many other products with simmilar situations like paper (think there's 3 producers and supplying the s load of different brands) and washing powder used to be the same where they all are produced exactly the same by the same place and then distributed in different packaging to create the impression of choice because at the end of the day when something go's wrong with a product we all want to go by the alternate.

dats my 2cents :happy:

Edited by Inline 6
  • 2 weeks later...
  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 months later...

was getting horrible fuel economy on mobil synergy, went to BP 98 at a servo which just had its tanks replaced. Improved fuel economy by 30-40kms. It's good to find out how old the tanks are. They are only warrantied for 12 years.

all of those don't inherently give you bad fuel economy

o2 sensor will only + - fuel by 5%

spark plug will effect boost load but not really chew through your fuel

coil packs go hand in hand with plugs but IMO wont chew through your fuel

i had this issue with my car coming back from our melbourne trip and to tell you the truth i never found or sorted the problem out

a good friend of mine used to organise all the trucks to do the fuel deliveries to a few different companys petrol stations. apparently mobil import the fuel and then on sell to bp and shell. this is ready to go fuel ill also mention, so presumably there is no different between 98 octane bp shell or mobil.

that is normal for most countries

and E fuel will fark your rubber,pumps etc.

to my surprise i changed the plugs last weekend and the car seems to be chewing through the same amount of fuel.....so spark plugs do not contribute towards bad fuel economy.....but however i did notice a difference when i changed my O2 sensor......car was driving much better and fuel economy was better by at least 20kms

Spark plugs can only ignite the fuel they are supplied, they in no way increase or reduce the flow of fuel through the injectors.

Unless your engine isnt running right and you use more pedal to compensate.

My R32 (when it was alive) 172rwkw, big flames, 400-450km to a tank on ShellV Power/BP Ultimate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...