Jump to content
SAU Community

Recommended Posts

basing which fuel is better just on some random feeling you get about how your car go's after leaving the petrol station or a random issue that started soon after using a certain fuel is maybe not the best form of deciding which is best. im willing to bet its all the same sh*t. without proper testing you dont know kids.

this is how it works in WA, exchange the word BP for mobil and you'll have the south Australian version. note the petrol is ready to go into your car when it leaves mobil (in sa) in the fuel trucks (if you want to steal it fnf style) my mate managed all the fuel trucks in SA and they go's straight from mobil to the service stations out in the stix and locally for all BP MOBILS and SHELLS.

from http://www.fuelwatch.wa.gov.au/misc/dsp_fa...standing_Fu.cfm

I. Fuel quality & measurement

1) Do any retailers sell ‘dodgy’ fuel / How do I know if fuel is ‘dodgy’?

There is very little difference in the quality of fuel sold in WA, no matter where you buy your fuel. BP operates the only refinery in the State and supplies over 90% of the petrol sold in WA.

Also all fuel sold in WA is required to comply with State and Commonwealth quality standards. Occasionally, a small amount of petrol may be imported into WA, however the fuel must still meet with the fuel quality standards.

The main difference in the fuel comes from company marketed additives. If you have concerns about the fuel quality at a particular site, raise your concerns with the site manager in the first instance.

For more information about the fuel standards contact:

• For WA: Department of Environment and Conservation

• For Commonwealth: Department of the Environment, Water, Heritage and the Arts

--------------------------------------------------------------------------------------------------------------------------------------------------------------

if you got a crap supply of fuel who's fault is it? the store you bought it off or mobils refinery or the original crude oil. it could be just a 1 off random batch that had some contaminant in it.

now if you own a ferrari or something to that effect you may just wanna play it extra safe and always hit BP shell whatever floats ya boat. if you have a GTR maybe also play it a bit safer as i do only going to BP but if you own a very average turbo i just would avoid bilo brand petrol stations.

there are also many other products with simmilar situations like paper (think there's 3 producers and supplying the s load of different brands) and washing powder used to be the same where they all are produced exactly the same by the same place and then distributed in different packaging to create the impression of choice because at the end of the day when something go's wrong with a product we all want to go by the alternate.

dats my 2cents :happy:

Edited by Inline 6
  • 2 weeks later...
  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 months later...

was getting horrible fuel economy on mobil synergy, went to BP 98 at a servo which just had its tanks replaced. Improved fuel economy by 30-40kms. It's good to find out how old the tanks are. They are only warrantied for 12 years.

all of those don't inherently give you bad fuel economy

o2 sensor will only + - fuel by 5%

spark plug will effect boost load but not really chew through your fuel

coil packs go hand in hand with plugs but IMO wont chew through your fuel

i had this issue with my car coming back from our melbourne trip and to tell you the truth i never found or sorted the problem out

a good friend of mine used to organise all the trucks to do the fuel deliveries to a few different companys petrol stations. apparently mobil import the fuel and then on sell to bp and shell. this is ready to go fuel ill also mention, so presumably there is no different between 98 octane bp shell or mobil.

that is normal for most countries

and E fuel will fark your rubber,pumps etc.

to my surprise i changed the plugs last weekend and the car seems to be chewing through the same amount of fuel.....so spark plugs do not contribute towards bad fuel economy.....but however i did notice a difference when i changed my O2 sensor......car was driving much better and fuel economy was better by at least 20kms

Spark plugs can only ignite the fuel they are supplied, they in no way increase or reduce the flow of fuel through the injectors.

Unless your engine isnt running right and you use more pedal to compensate.

My R32 (when it was alive) 172rwkw, big flames, 400-450km to a tank on ShellV Power/BP Ultimate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...