Jump to content
SAU Community

Recommended Posts

Help me get my shed back in order. Need to fund a new wakeboard!

HKS VPC. Come with everything. Use this to remove your AFM's on your gtr and still run std or pfc ecu $400

Set of front guard liners and front under tray. Has front brake ducts and I won't seperate. $250 Getting very rare!

RB26DETT oil pump $80

Harmonic balancer $50

R32 GTR fuel pump in cradle $80 each. I have two of these.

Twin Turbo pipe - From turbo's to intercooler pipe $100

R32 3inch exhaust with seperate de-cat pipe. Has centre muffler, no rear muffler, just straight throught to out back $100

Standard R32gtst exhaust I used to clear epa on gtr $100

R32 GTR metal fuel cap $30

R32 GTR ABS mater cylinder $100

R32 GTR G-Sensors $100 Qty 2

All ECU's below suit std injectors and turbos

2x Mines ECU's for R32 GTR $100 each

Blitz ECU for R32 GTR $100

New R/H sill panel $100 Suit GTR/GTST

R/H tail light $30

R/H mirror $25

R33 GTR lowered rear springs for std style shocks $50 sits very nice

Tein stiff springs. Perfect for drift. $30

Melbourne Can post. Please no time wasters. You know who you are!

This will all end up on ebay if its still around in a few weeks so I thought I'd give the SAU crew first dibs.

Looking for a std boost solenoid, flywheel and clutch and intercooler for R32 GTR.

Link to comment
https://www.sau.com.au/forums/topic/306748-large-range-r32-gtr-gtst-parts/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

De-cat pipe is to suit the exhaust. Prob won't go between a std style front pipe and exhaust. Might be a bit long. Its just a bit of pipe with 2 flanges welded on. No need for pick.

Re- clutch/flywheel. Might be interested. Depends on price. Don't need it to bad but its a bit of a pain when I have to take off with my boat on when stopped on hills or at the ramp with the tripple plate in it. Pm me with a price. It'll just mean I can't give the car to much of a hard time as I've seen a few std flywheels explode.

There for std injectors with the normal mods - exhaust and a bit of boost. I have run all of these and they run fine. Don't have any dyno results for them compared to stock but I did look at the fuel and timing map on them and it was std bottom end of map with a fair bit of timing and fuel taken out of the top where you don't want it after adding a little boost.

How much you wanna spend on clutch an flywheel as I have a exedy heavy duty cushion button clutch and STD flywheel sitting around...

Feel free to contact me On 0419797023 cheers Tim

Wouldn't spend much as a flywheel is worth nothing as there the same as 20's I think plus they explode and a clutch is only around $250 new. Pm me with what you want for it.

Got One pm replied.

There just std looking ecu's with Mines and Blitz ecu stickers on them. They're definantely chipped.

$100 is cheap man..but once they are chipped, (normally done in japan) they cannot be played with at all... had one in my GTR.... got rid of it with the engibe build... you wouldnt have front pipe for 32 GTR would ya?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
×
×
  • Create New...