Hole Drilled For Fmic Piping Under Battery

[RubyRS4]

Has anyone got pics of the fmic piping that runs to the throttle body? I've got a pipe kit for the stagea to replace the current return setup ... but I want to see roughly where I should drill/saw the hole for the piping.

While I'm at it ... anyone in Adelaide got the drill/saw bit I need to do the job?

[RBPOWA-(TJ)]

Duncan.......

[260tech]

We did an install on a GTIR a while back. Pulled the front bits off, mounted the ic & pipes then marked out where they looked like they wanted to go throo (with reference to other immovable objects). To make hole used something big enough to get hacksaw blade in then followed the marked line. Handjob.

[Duncan]

lol me?

mine is forward facing plenum is that what you mean?

in any case its back at the mechanic for its full boost tune now the run in is done.

but it goes through the battery tray pretty close to the chasis rail in my case (need to move the washer bottle underneath).

i guess it also depends on cooler width and the kit's piping?

[wolverine]

Pulled the front bits off, mounted, make hole, Handjob.

I think what 260tech is trying to say is...

Line up pipework, mark spot, hole saw, a bit of cooling lube...bob's your uncle.

[lachlanw]

the pipe that runs through the hole is a U shape so you can measure the distance from the centre of the end that goes onto the core to the centre of the pipe . once you mount the core get the tape measure and on a radius from the core you can get it pretty prot on