Jump to content
SAU Community

Recommended Posts

Location: IPSWICH

Reason for Selling: CAN'T AFFORD TO OWN IT, AND NEED THE CASH

Asking Price: $15500 NEG

Contact Info: MARK ELLIS 0412993434 0732828882

Extra Information:

THE CAR IS ABOUT TO RUN OUT OF REGO SO I WANT TO SELL IT UNREGISTERED, SOME MODS INCLUDE: STRAIGHT CUT GEAR BOX WITH SHORT SHIFTER, CUSTOM BUILT TWIN PLATE CLUTCH CAPABLE OF 1000HP, FORGED ENGINE REBUILD, MILD CAMS, HKS GT 2540 ROLLER BEARING TURBOS, AFTERMARKET INJECTOR, N1 OIL PUMP, FRONT AND REAR STRUT BRACES, NISMO 360KM/H DASH. THE BODY IS IN PRETTY GOOD CONDITION WITH GOOD PAINT AND ONLY A FEW LITTLE DINTS AND SCRATCHES FROM THE PREVIOUS OWNER.

THE AIR FLOW METERS HAVE SEEN BETTER DAYS AND THE CAR COULD DO WITH A DECENT TUNE AS IT STILL HAS THE STANDARD ECU. THE PREVIOUS OWNER SAID IT USED TO MAKE 600HP SO MAYBE WITH AN AFTER MARKET ECU AND NEW AFM'S IT SHOULD BE A LITTLE ROCKET.

IT STILL HAS STOCK SUSPENSION AND THE FRONT SUSPENSION SQUEAKS A LITTLE BIT, THE WHEELS ARE IN NOT SO GOOD CONDITION WITH SOME BATTLE SCARS ON THEM FROM WHEN THE LAST OWNER HAD A FIGHT WITH A GUTTER IN THE CAR, LOL. AND THE CAR SOME TIMES TRACKS ON THE ROAD WHEN THE ROAD SURFACE IS UNEVEN, IV'E BEEN TOLD IT DUE TO THE OFF SET OF THE WHEELS.

THE INTERIOR IS IN GOOD CONDITION CONCIDERING TO AGE OF THE CAR BUT THE DRIVERS SEAT HAS A LITTLE WEAR ON THE SIDE OF IT UNDER THE SEAT COVER.

IF YOU HAVE ANY QUESTIONS PLEASE DON'T HESITATE TO CALL ME OR MESSAGE ME.

post-70816-1265935805_thumb.jpg

post-70816-1265936129_thumb.jpg

post-70816-1265936152_thumb.jpg

post-70816-1265936179_thumb.jpg

post-70816-1265936208_thumb.jpg

post-70816-1265936296_thumb.jpg

post-70816-1265936323_thumb.jpg

post-70816-1265936351_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/307915-r32-gtr-1990-un-reg-15500-neg/
Share on other sites

so this has after market turbos, injectors, built engine and a standard ecu?

somebody spent 10k+ on the engine, turbos and injectors, but couldn't be farked spending 1k on a computer?

got any receipts to prove build?

Yeah, i hear what your saying, the ecu should have definatly been put in, but the standard on has been chipped and re-mapped. sorry the only receipt i have for the mods is for the twin plate clutch, i've only been told from the previous owners about all the mods.

sorry i couldn't tell you more.

cheers mark.

  • 2 weeks later...

yeh right - bog standard!

Location: IPSWICH

Reason for Selling: CAN'T AFFORD TO OWN IT, AND NEED THE CASH

Asking Price: $15500 NEG

Contact Info: MARK ELLIS 0412993434 0732828882

Extra Information:

THE CAR IS ABOUT TO RUN OUT OF REGO SO I WANT TO SELL IT UNREGISTERED, SOME MODS INCLUDE: STRAIGHT CUT GEAR BOX WITH SHORT SHIFTER, CUSTOM BUILT TWIN PLATE CLUTCH CAPABLE OF 1000HP, FORGED ENGINE REBUILD, MILD CAMS, HKS GT 2540 ROLLER BEARING TURBOS, AFTERMARKET INJECTOR, N1 OIL PUMP, FRONT AND REAR STRUT BRACES, NISMO 360KM/H DASH. THE BODY IS IN PRETTY GOOD CONDITION WITH GOOD PAINT AND ONLY A FEW LITTLE DINTS AND SCRATCHES FROM THE PREVIOUS OWNER.

THE AIR FLOW METERS HAVE SEEN BETTER DAYS AND THE CAR COULD DO WITH A DECENT TUNE AS IT STILL HAS THE STANDARD ECU. THE PREVIOUS OWNER SAID IT USED TO MAKE 600HP SO MAYBE WITH AN AFTER MARKET ECU AND NEW AFM'S IT SHOULD BE A LITTLE ROCKET.

IT STILL HAS STOCK SUSPENSION AND THE FRONT SUSPENSION SQUEAKS A LITTLE BIT, THE WHEELS ARE IN NOT SO GOOD CONDITION WITH SOME BATTLE SCARS ON THEM FROM WHEN THE LAST OWNER HAD A FIGHT WITH A GUTTER IN THE CAR, LOL. AND THE CAR SOME TIMES TRACKS ON THE ROAD WHEN THE ROAD SURFACE IS UNEVEN, IV'E BEEN TOLD IT DUE TO THE OFF SET OF THE WHEELS.

THE INTERIOR IS IN GOOD CONDITION CONCIDERING TO AGE OF THE CAR BUT THE DRIVERS SEAT HAS A LITTLE WEAR ON THE SIDE OF IT UNDER THE SEAT COVER.

IF YOU HAVE ANY QUESTIONS PLEASE DON'T HESITATE TO CALL ME OR MESSAGE ME.



  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...