Jump to content
SAU Community

Recommended Posts

Picked up a fresh import 34 GTT last week, now its in townsville, just wondering if anyone knows if the crushing humidity here (generally 75 to 95% all the time) has an effect on the performance or fuel efficiency? If so to what extent? I assume the car is made for cooler and less humid japan, hence the small intercooler so if anyone can help please do. Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/308138-high-humidity-vs-turbo/
Share on other sites

yeah its common knowledge that temperature would affect performance, humidity on the other hand i am unsure

just use good fuel and ensure the engine is in good working order

the intercooler is not on the factory setup to suit the climate, it is there to reduce heat from the intake charge from the turbocharger. the intercooler is only as a good as the ambient air temperature

yeah its common knowledge that temperature would affect performance, humidity on the other hand i am unsure

just use good fuel and ensure the engine is in good working order

the intercooler is not on the factory setup to suit the climate, it is there to reduce heat from the intake charge from the turbocharger. the intercooler is only as a good as the ambient air temperature

Yeah i know temp is an issue, but cant figure out the humidity, the air is so thick and heavy, i know its not the same but breathing while running here is so much harder than in low humidity i thought maybe it could have a similar effect on a car.

it should be ok, i mean there isn't much you can do it about - ie you can't negate humidity

Yeah true,but i noticed in 1/4 mile time cards humidity is listed as a factor alongside temp, wind etc.

Maybe slightly worse for wind resistance or something, im out of ideas haha.

Thats why I live in Tassie. It's cold ALL the time! ha ha ha. Good crisp air is awsome for power production and throttle response.

It would be hard to know what effects humidity (if any) would have in such a warm climate.

If your worried about intake temps and humidity, throw the car on a chassis dyno in summer and give it a good work out. Then log the coolant, oil and air intake temps as well as afr's/detonation.

If your so inclined- install a larger intercooler and oil cooler with a thermostat. Also if the car is auto, invest in a trans cooler if your going to give the car a hard time.

Edited by XRATED
Thats why I live in Tassie. It's cold ALL the time! ha ha ha. Good crisp air is awsome for power production and throttle response.

If your worried about intake temps and humidity, throw the car on a chassis dyno in summer and give it a good work out. Then log the coolant, oil and air intake temps as well as afr's/detonation.

If your so inclined- install a larger intercooler and oil cooler with a thermostat.

May try that actually, will have to wait until the end of the wet season for a cool day with lower humidity but.Yeah bigger intercooler is on the to do list lol

May try that actually, will have to wait until the end of the wet season for a cool day with lower humidity but.Yeah bigger intercooler is on the to do list lol

Try that.... moving to Tassie, Good plann! ha ha ha.

If your worried about the heat/humidity throw the car on the dyno on the hottest- most humid day you can...

Yeah I know... ha ha ha

I was stationed there for a while. PT on mondays after a sunday session is not fun in 45deg heat and 95% humidity.

Tell me about it, i still have 2 1/2 years here haha, thats what made me think about the car, it affected my performace so much i thought maybe the principal would transfer over?call me crazy

The effect of Humidity on engine performance is not worth considering.

Temperature and air pressure are the main factors that effect air density, which in turn will dictate engine performance. Every degree of temperature increase is equivalent to going up in elevation by 120 feet. A drop in pressure by 1 HPa has the effect of going up in elevation by 30 feet.

A turbo charged car is going to be less effected by pressure changes than a naturally aspirated one, because air is being forced into the manifold at greater than ambient. Temperature is the main thing that will reduce a turbo charged cars performance.

In Aviation we doing not factor Humidity into performance calculations because it is negligible.

The effect of Humidity on engine performance is not worth considering.

Temperature and air pressure are the main factors that effect air density, which in turn will dictate engine performance. Every degree of temperature increase is equivalent to going up in elevation by 120 feet. A drop in pressure by 1 HPa has the effect of going up in elevation by 30 feet.

A turbo charged car is going to be less effected by pressure changes than a naturally aspirated one, because air is being forced into the manifold at greater than ambient. Temperature is the main thing that will reduce a turbo charged cars performance.

In Aviation we doing not factor Humidity into performance calculations because it is negligible.

Sounds pretty definitive, thanks mate.

Humidity does have an effect on any engine.

Those water parrticles are taking up space, oxygen space. The greater the humidity, the less air your engine has to breathe.

Why do you think a dyno needs input from humidty, inlet air temp, etc etc?

It's all compensated for in the dyno's computer package.

Give Trent or someone who does a lot of tuning a PM.

Humidity does have an effect on any engine.

Those water parrticles are taking up space, oxygen space. The greater the humidity, the less air your engine has to breathe.

Why do you think a dyno needs input from humidty, inlet air temp, etc etc?

It's all compensated for in the dyno's computer package.

Give Trent or someone who does a lot of tuning a PM.

Those are the lines i was thinking along.Who is trent?

Yeah the humidity up here is very annoying, walk outside for five minutes and feels like you have walked into a shower. I notice a huge difference from day time to night time driving here, mixture of humidity and air temperature definetely has a very noticable effect.

Edited by PM-R33
Yeah the humidity up here is very annoying, walk outside for five minutes and feels like you have walked into a shower. I notice a huge difference from day time to night time driving here, mixture of humidity and air temperature definetely has a very noticable effect.

Yeah i notice that too, but night here is still hot and humid like a rainy hot day anywhere else hey.now its crazy with all this rain its just getting worse.

Yeah its not the best place for enjoying a modified car. Hopefully if all goes through i should have my car out doing circuit work this year. Really worried about water and oil temps going throgh the roof though. Most of my "spirited driving" is done at night time where i never have an issue with temps, day time however is a bit of an unknown.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...