Jump to content
SAU Community

Hi Guys I Am New To This Vic Forum Some Pic Of My Car. R33 Restoration


Recommended Posts

thanks alot guys i feel better now at least someone else like it :thumbsup: and wheels they are rays lmgt2 17" 8 inc front 9" rear i dont know abouth ofset i am right is 35 .i am looking for 10 inc dish at the back and put the 9 inc on the front to fill the arch .i am looking foward to meet some guys from here and i am thinking to have piad membership i should do it this week .thanks agian for a warm welcome .mark

^^ Nice, so they are wide ass wheels for sure you needed the guards.

NISMO LMGT 2 = Awesome.

GTSR Badge, from memory the EAST BEAR R34 4 door kit has a similar, if not, same badge.

Where'd you get the badge from?

^^ Nice, so they are wide ass wheels for sure you needed the guards.

NISMO LMGT 2 = Awesome.

GTSR Badge, from memory the EAST BEAR R34 4 door kit has a similar, if not, same badge.

Where'd you get the badge from?

thanks agian to be honest i need bigger dish i want 10 inc back and put the back ones on front 9 inc .

that badges i bought mine from yahoo auction but now some told me they are selling them on ebay

thanks agian to be honest i need bigger dish i want 10 inc back and put the back ones on front 9 inc .

that badges i bought mine from yahoo auction but now some told me they are selling them on ebay

Yeah I think you'd need it to fill out the front guards and as for the rears, you could go that extra inch.

Always loved and always will love NISMO LMGT wheels.

NISMO LMGT 4's are my fav but my car came wtih VOLK TE 37's, just as good. :down:

Are your front and rear molded guards from a body kit manufacture or are they custom made from a body kit place?

They looks similar to the NISMO 400 R guards... Or they NISMO 400 R's?

Yeah I think you'd need it to fill out the front guards and as for the rears, you could go that extra inch.

Always loved and always will love NISMO LMGT wheels.

NISMO LMGT 4's are my fav but my car came wtih VOLK TE 37's, just as good. :down:

Are your front and rear molded guards from a body kit manufacture or are they custom made from a body kit place?

They looks similar to the NISMO 400 R guards... Or they NISMO 400 R's?

they do look good lmgt4

nothing wrong with volk they are great wheel as well and no they are not moulded guard they are only flares and i didnt buy them from here i asked my mate to send them for me from europe and yes they are 400r flares

they do look good lmgt4

nothing wrong with volk they are great wheel as well and no they are not moulded guard they are only flares and i didnt buy them from here i asked my mate to send them for me from europe and yes they are 400r flares

NISMO 400 R flares = WIN!

Again, get the wider wheels + lower it about an inch or 2 and you'd have a tuff fitment / stance.

:)

NISMO 400 R flares = WIN!

Again, get the wider wheels + lower it about an inch or 2 and you'd have a tuff fitment / stance.

:D

trust me the front is too low already but what i can do maybe i upgrade for 18" by 10 "

Awesome!

Is it still RB25?

Don't get LMGT, at least TE'37 time attack style 17x10 at the back or some tuff Works rim with crazy dish and offset.

thanks and yes it is rb25

that look good with a really deep dish i agree

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...