Jump to content
SAU Community

Recommended Posts

Hi guys,

I am finishing up converting the front of my NM35 RS to the PM35 Autech 350S but am having a little trouble with the grill.

Basically, getting the complete OEM Autech grill from Nissan Japan would cost me just over $1k (!!!!!!!).... needless to say, it ain't happening.

What I would like to test out is if the NM35 Axis grill will fit (same top clips and bonnet ornament, just not sure if there is a difference in width between the two grills).

So if there are any 2001-2003 M35 Axis owners in Melbourne on here that wouldn't mind me bringing my car to test the grill size, please let me know.

Edited by iamhe77
Link to comment
https://www.sau.com.au/forums/topic/309321-m35-axis-owners-in-vic/
Share on other sites

I have a C34 grill.....should fit up OK.....same aren't they?

:(

Couldn't help yourself could you?

Custom stainless grill ftw, to go with the shiny wheels. :(

Dunno man.... with the way you go on about weight saving, wouldn't aluminium be better? :P

Ok, since I have couldn't be stuffed reading through all of the responses from all the Vic Axis owners, can I ask that ANY M35 Axis owner possibly lend a hand and measure the width of the top and bottom of the grill and also the width of the bonnet ornament?

I just replaced all my front end a couple of months ago. I will ring panel beater to see what is left over.

From memory grill was about $700 mark the lights were $2k each.

Some one else's insurance was paying so who cares about shopping around.

Yo what scotty said custom stainless grill FTW organize a group buy I already got the shiney wheels.

Edited by boostedaxis

Yeah Mark, the prices for the grill assembly are just a tad high I think.

Could you possibly measure across the front of the top and bottom of your grill for me?

I can get an NM Axis grill with bonnet ornament for around $300, but I need to know if it will fit.

I just replaced all my front end a couple of months ago. I will ring panel beater to see what is left over.

From memory grill was about $700 mark the lights were $2k each.

Some one else's insurance was paying so who cares about shopping around.

Yo what scotty said custom stainless grill FTW organize a group buy I already got the shiney wheels.

Sorry... what? WTF!?! 2K EACH? For the lights? How is that even possible? Were they just skimming some money off the top cos it was an insurance job? I would've figured max 1K each.

Sorry... what? WTF!?! 2K EACH? For the lights? How is that even possible? Were they just skimming some money off the top cos it was an insurance job? I would've figured max 1K each.

Sounds about right.

I call a couple of Nissan dealerships for a price on the series 2 Xenon headlights.... $2.5k each.

No skimming buddy. Two words for you JUST JAP. It was an $8000 repair 1 headlight 1 grill 1 bumper small repair and paint on the bonnet. What ever you do dont crash an axis.

I will measure up for you when the missus gets home this arvo.

No skimming buddy. Two words for you JUST JAP. It was an $8000 repair 1 headlight 1 grill 1 bumper small repair and paint on the bonnet. What ever you do dont crash an axis.

I will measure up for you when the missus gets home this arvo.

Cool, thanks :ninja:

No skimming buddy. Two words for you JUST JAP. It was an $8000 repair 1 headlight 1 grill 1 bumper small repair and paint on the bonnet. What ever you do dont crash an axis.

I will measure up for you when the missus gets home this arvo.

that's exactly what happened to my car when some dick reversed into me. Thank God it's covered by Shannons. 1 headlight, 1 front bar, 1 reo bar, grill, minor repair on the bonnet. All up about $6000 but headlight is not new as there's none from Nissan Japan atm, so I bought Cam's 2nd hand set :ninja:

Btw Cam I got the lights, so thanks!

Ok done measurements for you.

First one is top to bottom vertically straight up the center bar = 175mm

Second measurement is across the top of the grill= 970mm

3rd measurement is the lower length that was hard to measure because of the curve. I measured it across the lower horizontal bar on the grill =850mm

Thanks for that Mark.

Seems that it will not fit as it is ~80mm wider than the Series 2 Axis grill.

Oh well... grill-less for a while longer I guess

Ive got a sheet of ally here with your name all over it, for when you change your mind. :)

You can drill all the holes tho, or laser cut Nismo into it? :devil:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...